INSTALLATION ON THE ROOF
1. Clean the mounting surface with a suitable cleaner.
2. The mirror and the LNB unit must face the rear of the vehicle during assembly.
Rear of the vehicle
Dish bracket
CarSat55:
Note: Ensure a secure installation of the satellite system by screwing and, if necessary,
by additionally gluing with suitable assembly adhesive.
INSTALLATION ON THE ROOF
1. Assembly with screws:
a) Transfer the mounting points of the mounting plate to the vehicle
b) Secure the mounting plate securely on the roof.
c)
d) Fasten the mirror support so that the satellite dish lies horizontally
Direction of travel
CarSat65:
45cm
CarSat80:
60cm
23cm
roof and drill the corresponding holes.
Use commercially available body sealant to seal the mounting
screws.
when retracted.
28
Front of the vehicle