Auto Tuning; Manual Tuning - Reflexion LDDW19i Bedienungsanleitung

DVB-T/T2HD MODE
Press the [INPUT] button and select the input source "DVB-T" to switch to DVB-T mode. If you
have selected the DVB-T mode for the first time, the following settings are available:

Country or Region:

Automatic station search:

Manual station search:

LCN:

5V:

Auto Tuning:

1. Select "Digital Auto Tunicng".
2. Navigate to "OK" to start the search or to "Cancel" not to start the search.
3. Once you have confirmed the search, the search begins. The number of channels found is
displayed.
4. Once the search is complete, DVB-T playback begins with the first station.
Note:

You can cancel the search with the [EXIT] key.

Manual Tuning:

1. Select "Manual Tuning".
2. The following settings are available:

Channel:

Frequency (MHz):

Bandwidth (M):
3. Select "Start scan" to start the manual station search.
4. The stations found are added to the station list.
DVB-C MODE
Press the [INPUT] button and select the input source "DVB-C" to switch to DVB-C mode. If you
have selected the DVB-C mode for the first time, the following settings are available:

Country or Region:

Automatic station search:

Manual station search:
Select the country or region.
Start the automatic station search.
Access the manual settings.
On / Off (The setting "Off" is recommended).
On / Off (5V voltage for active DVB-T antennas).
Select the channel to be searched for.
The frequency changes with the selection of the channel.
Select the bandwidth.
Select the country or region.
Start the automatic station search.
Access the manual settings.