Shooting Information Display - Berger & Schroter 31648 Bedienungsanleitung

1.4 Shooting Information Display

When the camera is turned on (the power switch is slid to ON or TEST
position), the current settings will be displayed on screen.
2. Camera
mode
1. SIM card
Fig.4 Shooting
information display
1.5 MMS/GPRS function
This camera can send pictures instantly to your mobile device via
GSM/GPRS network. You'll be alerted just when a picture or video has
been taken. The camera sends MMS message through GPRS network,
so before using this function, you need to open GPRS service from your
service provider. It supports four bands: 850MHz, 900MHz, 1800MHz
and 1900MHz.
SIM card Icon: There are two SIM card icons which stand for different
installation situations.
well. means the MMS function can't work correctly because of loss
of signal or other communication issues.
There are 4 submenu settings within the MMS/GPRS function. They are
Send Mode, MMS Set, GPRS Set and Send to. Send Mode means to
choose a way to send MMS (refer to 4.1 table). MMS Set and GPRS
Set means to have the right MMS and GPRS setting parameters accor-
ding to your network. Send to means to input the phone number or
email address which you want to send to. All 4 submenus must be cor-
rectly set up.
3. Image size
10. Number of images
means the SIM card is inserted and it works
25
4. Signal strength
5. Batterylevel
6. Tlecom provide
7. Date (M;D;Y)
8. Time /H;M;S)
9. Available space