Farmcomp Wile 65 Gebrauchsanweisung Seite 17

EN
Exceptional growth conditions can affect
the grain quality and the electrical
properties of the seeds can also cause the
incorrect measurement result. To avoid
this problem use Adustment -function
and adjust the measurement result to
conform to the reference value (see
paragraph Adjustment). That's why
before the new harvest season we always
recommend to check the reading of your
meter against an oven dried sample in
grain reception center. If the
measurement result is different, adjust the
result to conform to the reference value
(see paragraph Adjustment). This is
especially important when you start to
handle the new type of grain or suspect
that the grain is different from standard
grain. After you have adjusted the
measurement result to conform to the
reference value, you can make precise
measurements of the selected grain. We
recommend to ask for the reference value
of the specific type of grain from the grain
reception center always before the new
harvest season and adjust the scale if
needed. By doing this you will avoid
incorrect measurement results which can
be caused by exceptional grain properties.
For example, if specific weight is 10%
lower than normal, the meter can show
too low of a moisture content.
Correspondingly if specific weight is
higher than normal, the meter can show
too high of a moisture content.
17