Display the
scale
adjustment
Erasing the
scale
adjustment
Measurement
of the external
each scale.
Switch on the meter. List
the options pressing the
Menu -button until
Adjustment appears on
the display and then
press ON/OFF. The
scale adjustment value
will appear on the
display. For example:
C+0,2%. This value
means that the scale
was adjusted upwards
by 0,2 percent moisture.
To return to the main
menu without changing
the value press ON/OFF.
Switch on the meter. List
the options by pressing
the Menu -button until
Adjustment appears on
the display and then
press ON/OFF. The
scale adjustment value
will appear on the
display. Now you can
erase the scale
adjustment with a single
press on the Menu –
button. Always check
that after the scale
adjustment has been
erased C0,0% is
displayed. To return to
main menu press
ON/OFF.
Connect Wile 651 L
-external temperature
EN
13