The Home Screen - Samsung HT-E6750W Bedienungsanleitung

Initial Settings > Auto Sound Calibration
Connect the calibration microphone
to the ASC IN jack and set up all
speakers correctly, as shown, before
starting.
Note: Please be aware that this
process outputs a loud test sound
that is needed for proper calibration.
Press Next to set the best speaker
output level.
Press Skip to configure later.
13 . The Auto Sound Calibration screen appears.
Plug the ASC microphone into the ASC IN
jack on the product.
14 . Press the E button to select the Next
button. Setting the Auto Sound Calibration
function takes about 3 minutes. Select Next,
and then press the E button.
Initial Settings > Complete
Setup completed.
On-Screen Language
Network Settings
Software Update
TV Aspect
Auto Sound Calibration
15 . The Setup completed screen appears. Check
the settings to confirm they are correct.
Select OK, and then press the E button.
The Home screen appears.
| NOTE |
\ If you want to display the Initial Setting screen again and
make changes, select the Reset option. (See page 31)
\ If you use an HDMI cable to connect the product to an
Anynet+ (HDMI-CEC)-compliant Samsung TV and 1.) You
have set the Anynet+ (HDMI-CEC) feature to ON in both
the TV and the product and 2.) You have set the TV to a
language supported by the product, the product will select
that language as the preferred language automatically.
HT-E6750W_XU_0222.indd 25 HT-E6750W_XU_0222.indd 25
1/4
Previous
Next
Place calibration
mic. here

Skip
User

Press Smart Hub to
enjoy a variety of

Internet content.
OK
-

Smart Hub


The Home Screen

AllShare Play
Play videos or music, or view photos from discs or connected devices.
2
1
Smart Hub
Smart Hub. Starts Smart Hub. From Smart Hub,
1
you can access YouTube, games, and other apps.
AllShare Play. Play videos, photos or music content
2
from Disc, USB, PC or mobile devices.
3
Function. Select the audio/video input source.
Settings. Set various functions to suit your personal
4
preferences.
Displays the coloured buttons on your remote that
5
you can press to access or perform functions.
 Selecting an Option on the Home Screen
1 . To select an option on the Home screen,
move the cursor using the ◄► buttons until it
highlights the option of your choice, and then
press the E button.
3
4
Function Settings
5
d WPS(PBC)
25
|
English
2012-02-22 오후 2:07:02 2012-02-22 오후 2:07:02