Herunterladen Inhalt Inhalt Diese Seite drucken

Waste Disposal And Environmental Protection; Technical Specifications - hanseatic BVN 2500 Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Troubleshooting
Attention! Always remove the plug from the
mains socket before starting any work on the
machine.
The machine won't start: Check whether the switch
is in the "I" position; check that the residual current
circuit breaker is not switched off and that no fuses
have blown in its electric circuit. If the machine still
won't start have it inspected by an authorised cus-
tomer service firm.
The machine won't vacuum: Check whether the
leaf collection bag is full. If it is, empty it; check
whether the lever for the reversing flap is in the cor-
rect position, otherwise have the machine inspected
by an authorised customer service firm.
The machine won't blow: Check whether the lever
for the reversing flap is in the correct position, other-
wise have the machine inspected by an authorised
customer service firm.
The shredder wheel is blocked: Check whether an
object has been sucked in that is too large; a piece

Technical Specifications

Rated voltage
Rated frequency
Rated power consumption
Fuse (time lag)
Rotation
Max. blowing speed
High blow volume
Bag volume
Weigth
Protection class II/VDE 0700
The A-rated sound pressure level of the device measured in accordance with DIN 45635 Part1, Appendix D is:
Weighted sound pressure:
Vibration max.
These values were measured in accordance with the following standards: prEN 15503
This device has a radio interference suppression according to: EN 55014-1, EN55014-2
Please wear ear protectors!
BvN 2500
V~
230
Hz
50
W
2500
A
16
rpm
6.000-14.000
km/h
210
m
/ min.
11
3
l
45
kg
3,8
87 dB(A)
<3,96 m/s²
GB-5
of wood, cardboard or other object has become
jammed between the impeller and shredder cham-
ber. If the shredder wheel remains blocked have
the machine inspected by an authorised customer
service firm.
If the machine vibrates, please immediately stop us-
ing it. Have the machine inspected by an authorised
customer service firm.

Waste disposal and environmental protection

If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose
of the device together with your domestic refuse, but dis-
pose of it in an environmentally friendly manner. Please
dispose of the device itself at an according collecting/
recycling point. By doing so, plastic and metal parts can
be separated and recycled. Information concerning the
disposal of materials and devices are available from your
local administration.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis