Cleaning And Maintenance - Chicco Polly Easy Gebrauchsanleitung

seat and the rigid crotch bar in order
to guarantee the safety of your child
when using this product as a High
chair.
• The tray alone does not guarantee
the safety of your child. Always use
the safety harness.
• Never move the high chair when the
child is seated inside.
Do not allow children to play un-
supervised near the high chair, or
climb onto it.
• Do not use the high chair for more
than one child at a time.
• Do not place the high chair near win-
dows or walls, where strings, curtains or
other objects may be used by the child
to climb out of the high chair, and to
prevent the risk of suffocation and/or
choking.
• Do not place the high chair near win-
dows or walls, to prevent the child
from affecting the stability of the high
chair, making it topple over, by push-
ing with its feet against the wall.
• Always place the high chair on a hor-
izontal, stable surface. Never place
the high chair near stairs or steps or
carpets.
• Bags or weights must not be placed
on the activity tray or hung on the
high chair frame, as they might af-
fect the stability of the high chair.
• If the high chair is left exposed to di-
rect sunlight for a long time, allow it
to cool before placing your child in it.
• Do not leave the high chair under the
sun for a long time: prolonged expo-
sure to direct sunlight may cause the
fabric cover to fade.
• When it is not used, the high chair
must be kept away from the reach of
children.
• Never use the high chair without its
cover.
• Do not use accessories, spare parts,
or any component not supplied or
approved by the manufacturer.
• WARNING: Always engage the
parking device when the high chair
is not being moved.

CLEANING AND MAINTENANCE

The cleaning and maintenance of the high chair must only be car-
ried out by an adult.
Cleaning
Clean the fabric cover with a soft cloth soaked in water or a
neutral detergent. To remove the fabric cover from the high
chair repeat the operations, in reverse order, described to fix
the fabric cover to the structure (steps 7A-7C). Clean the plas-
tic parts with a soft cloth soaked in water. Never use abrasive
detergents or solvents.
In case of contact with water, dry the metal parts to prevent
rust from forming.
Maintenance
Keep the high chair in a dry place.
To avoid friction that may prevent the correct operation of the
High chair, ensure that all the movable plastic parts located along
the metal frame are free from dust, dirt or sand.
Lubricate only if necessary, with a light application of a silicone
based lubricant between the components
INSTRUCTIONS FOR USE
HIGH CHAIR FIRST ASSEMBLY/OPENING
WARNING: When opening the high chair, ensure that your child,
or other children, are at a safe distance. Ensure that during these
operations, the movable parts of the high chair do not come into
contact with your child.
1. Fix the legs to the high chair frame as shown in the diagram
(diagram 1A - diagram 1B).
WARNING: the ends of the front and rear legs have a different
shape to avoid errors in the assembly phase.
Rear legs: keep the two locking buttons, located at the base of the
frame, pressed down and insert the legs into the structure. The
parts are locked only when the two locking buttons come out
from the holes on the legs, and an audible click is heard, signalling
that the legs are securely fitted (diagram 1A).
Front legs: keep the two locking buttons located at the base of
the frame pressed down and insert the legs. The parts are correctly
locked only when the two locking buttons come out from the
holes on the legs, and an audible click is heard, signalling that the
legs are securely fitted (diagram 1B).
2. Stand at the back of the High chair and hold the two joints, then
press the open/close buttons. At the same time, open the High
chair legs using your foot, until an audible click is heard, signal-
ling that the legs are locked in the open position (diagram 2).
3. Raise the seat by holding the upper part of the backrest and pull
it upward, until the desired height is reached (diagram 3). The
High chair can be adjusted to 7 height positions.
4. Lower the seat and leg rest with your hands (diagram 4). The seat
is fixed to the frame by a fastening device.
5. Press the side adjustment buttons and lower the leg rest in a
vertical position (diagram 5).
6. Lower the armrests by pressing the two buttons located at the
rear of the armrests (diagram 6).
20