Twin Needle - Blaupunkt Comfort 930 Bedienungsanleitung

CORDED BUTTONHOLES
Hook filler cord (such as crochet thread or buttonhole twist)
over the spur and pull both ends of the cord forward under
the foot and tie off the cord as shown in the illustration.
Sew buttonholes so that zigzag stitches cover the cord.
When completed, release the cord from foot and snip off
the extra length.

TWIN NEEDLE

IMPORTANT: When using a twin-needle, set
stitch width at 3.5 or less, or
otherwise needle may brake.
A twin-needle produces two rows of parallel stitches for pin
tucks, double top stitching and decorative sewing.
THREADING THE TWIN NEEDLE
1. Insert the second spool pin. Place a spool on each spool
pin. Thread the two threads as one. Draw one thread
through each needle from front to back.
2. Pick up bobbin thread as for single needle sewing. Pull
the three threads together under the presser foot to the
back of the machine, leaving about 6" (15 cm) of thread.
NOTE: Needle threader cannot be used to
thread the twin needle.
Spur
Twin needle
mode indicator
EN
29