Detach Vesa Plate; Wall Mounting - ONKRON NP25 Benutzerhandbuch

1. Detach VESA plate

• Disassemble TV wall mount to pieces:
• Detach VESA-panel by unscrewing bolts with key (G).
• Remove plastic panels by sliding them apart.
Plastic
panels
WARNING: DO NOT apply much force while detaching plastic covers!
They may break and this case is not covered by the warranty.

2. Wall mounting

• WARNING: Check the wall's material and thickness of its finishing
layer.
• Assembly kit includes hardware suitable for mounting on concrete
wall with a plaster thickness of no more than 0.2" (5 mm) or dry walls
with wooden studs.
• Walls made of hollow brick, aerated concrete or double layered dry
walls need another mounting type that can be bought separately.
WARNING: DO NOT drill holes in
places where wiring may be located.
4
VESA panel
WARNING: DO NOT drill holes in
places where water pipe may be
located.
G