Operation; Standard - Dpc.ve45 - Jaga VERTIGA Serie Anleitung

6. OPERATION
6.1. STANDARD - DPC.VE45
L
230V
The unit starts at the last selected speed(1, 2 or 3), as soon as the water temperature > 28 ̊ C .
The unit starts at the last selected speed(1, 2 or 3), as soon as the water temperature < 24 ̊ C .
Off
All functions are disabled until the user switches on the unit via the control panel.
3 speeds .
6.1.1. Control
Press the button until the desired mode is reached
(± 3 sec.).
Red LEDs are flashing in the set mode: the water
temperature of the supplied water is too low (Tw <
28 ̊ C ).
Blue LEDs are flashing in the set mode: the water tempe-
rature of the supplied water is too high (Tw > 24 ̊ C ).
Manually raising / lowering the fan speed :
MODE 1 2 3
Speed : 1
46
[4]
Power Supply
Input: 110-240V - 50/60 Hz
Output: 12V
N
- 50Hz
MODE
Optie
1 2 3
Speed : 2
Off
The user manually selects the
desired mode via the control
panel The unit can run at 3
speeds. The unit starts as
soon as the set water tempe-
rature has been reached.
3"
verwarmen
3"
koelen
3"
MODE 1 2
Speed : 3
3