Sony Cyber-shot DSC-HX300 Gebrauchsanleitung Seite 23

Metering Mode
Cont. Shooting
Interval
Bracket Setting
Scene Recognition
Soft Skin Effect
Smile Shutter
Smile Detection
Sensitivity
Face Detection
Flash Level
Color Mode
Color Saturation
Contrast
Sharpness
Noise Reduction
Anti Blink
Movie SteadyShot
Register Setting
In-Camera Guide
Select the metering mode that sets which part of the
subject to measure to determine the exposure.
Select the number of images taken per second for Burst
shooting.
Set the type of the bracket shooting.
Set to automatically detect shooting conditions.
Set the Soft Skin Effect and the effect level.
Set to automatically release the shutter when a smile is
detected.
Set the Smile Shutter function sensitivity for detecting
smiles.
Select to detect faces and adjust various settings
automatically.
Adjust the amount of flash light.
Select the vividness of the image, accompanied by
effects.
Adjust the vividness of the image.
Adjust the contrast of the image.
Adjust the sharpness of the image.
Adjust the image resolution and the noise balance.
Set to automatically shoot two images and select image
in which the eyes are not blinking.
Set the strength of SteadyShot in Movie Mode. If you
change the setting for [Movie SteadyShot], the angle of
view will change.
Register the desired modes or camera settings. Set the
mode dial to (Memory recall mode) to retrieve the
registered settings.
Search the camera's functions according to your needs.
GB
GB
23