INTERSPIRO RS4 Benutzerhandbuch Seite 9

connection. The DIN versions are using one HP connection for a parking plug
for keeping the dust cover in place during the dive.
LP connections
• 2 LP outlets (3/8") are available on each cover. They can be used to connect
breathing/octopus valves, dry suits, BC hoses or any additional LP hoses.
HP connection
• The regulator has 2 HP outlets (7/16"). They can be used to connect a
pressure gauge, the Divator HUD or other HP devices.
DP1 connection
• The DP1 connection is added to the top cover of the RS4 regulator to
connect to the P+ regulator of the Divator DP1 surface supply system.
NOTICE
If the RS4 regulator shall be used without a Divator breathing
valve (which can release overpressure) connected to it, it must
be equipped with a relief valve.
RS4
9