Assembling The Divator Rs4 On The Cylinder; Attaching A Device To The Second High Pressure Outlet; Attaching And Directing Hoses On Divator Bc Use - INTERSPIRO RS4 Benutzerhandbuch

RS4

Assembling the Divator RS4 on the cylinder

Assemble the RS4 regulator onto the high pressure outlet on the cylinder,
either in the "parallel" mode or in the traditional "standard" SCUBA mode (as
seen on images).
Attaching a device to the second high pressure
outlet
It is possible to attach a HUD or other HP device to the second high pressure
outlet fitted with a parking plug. This procedure must be performed by an
Interspiro certified service technician according the RS4 service manual.

Attaching and directing hoses on Divator BC use

Installation of hoses must be made by an Interspiro certified service technician
according the RS4 service manual.
12