ECG 24 HS01T2S2 Bedienungsanleitung Seite 14

To skip the digital TV tuning (DTV), press OK and confirm by pressing OK when asked if you really want to
4.
cancel tuning.
5. After tuning the entire range, your receiver is ready to watch TV programs.
Receiving DVB-S/S2
1. The Signal source menu appears on the screen. Use vV to select TV and press OK.
On the digital TV signal modulation page use vV buttons to select the item DVB-S.
2.
Window Automatic tuning appears. To select parameters use the buttons b vV B. Start tuning by
3.
confirming the item Scan.
Satellite
Select the desired satellite according to the name and position in orbit.
Transponder
Selects a transponder with the appropriate frequency.
Coding
Select if you want to search for Free + encoded / Encoded / Free programs.
Type of service
Select whether to search for DTV+radio / Radio / DTV programs.
Network search
Turn on this function if you want to download the program list from the NIT table broadcast from the satellite
by the provider. The option is available if Quick scan is selected in Scan mode .
Scan mode
Select whether the receiver should tune through the entire frequency band (Blind scan) or tune only programs
on frequencies preset on TV (Quick scan).
Search
4. The TV starts searching for all available TV channels. The whole process can take several minutes. The
progress of tuning is indicated by a scale below which the number of found programs is displayed.
If you want to skip the DTV scanning, press OK and confirm by pressing OK when asked if you really want
5.
to abort tuning.
6. After tuning the entire range, your receiver is ready to watch TV programs.
Receiving DVB-C
The Signal source menu appears on the screen. Use vV to select TV and press OK.
1.
14
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 14 Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 14 19.08.2020 17:19:18 19.08.2020 17:19:18