Werbung
Verfügbare Sprachen
Verfügbare Sprachen
(For operating elements, see page 11)
1. Switch On
The camera will be switched on by pressing the power button
for 3 seconds in the condition of camera is off, the indicator
light will be turned on, the starup screen will be shown on the
internal ocular.
2. Switch Off
The camera will be switched off by depressing the Power but-
ton for 3s in the cndition of camera is on. The camera will be
switched off automatically if there is no operation over 20 mi-
nutes when in standby mode.
3. Standby Mode
When the camera is on, short press the Power button or no
operation over 15 minutes, it will enter into standby mode with
indicator light flickering. When WiFi is on or camera is recor-
ding or outputting video, automatic standby mode will not be
triggered. Short press the power button again to resume from
standby mode to normal mode.
4. Switch the Image Mode
Short click the Image Mode button to switch the image mode
from white hot, black hot, red hot, pseudo color, target high-
light mode circularly.
White Hot
Black Hot
Red Hot
Pseudo
Color Highlight
9
Werbung
