Herunterladen Diese Seite drucken

Berger & Schroter IRAY MTD 640-25 Plus Bedienungsanleitung Seite 12

Wärmebildgerät

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

12. Video Out
Turn on the analog video through the menu, and a video output icon
will appear on down-right corner of the image, then the analog video
can be output to the monitor with the specific video cable through
the MCX port.
13. NUC (Non-uniformity Correction)
Image degradation can be improved by manual correction.
There are two mode available-B(background) and S(shutter), which
can be switched through the main menu.
Press the E-zoom and Photo button at the same time to achieve the
manual correction.
If the correction mode B is selected, the lens cover shall be closed.
14. Power saving Mode
When the power saving mode is activated, a symbol "S" will be dis-
played on the left side of battery icon.
15. Reticle Zeroing
Switch tot he reticle zeroing interface through menu. In the reticle
zeroing interface, short press The E-zoom button, switch between
Up-Down adjustment mode and Left-Right adjustment mode- Short
press the Image Mode button and Picture button to adjust the reticle
position. Long press E-zoom button to save and exit the reticle ze-
roing interface
16. Charge
If the indicator is red, that means the battery is insufficient, please
charge in time.
Open the USB cover at the bottom, plug the USB cable in the imsger
and the power supply for charging or use portable power to charge.
When charging, the indicator light is yellow and green when full.
12

Werbung

loading

Diese Anleitung auch für:

32105