Firmware Upgrade - Cisco Systems LINKSYS WAG54GS Benutzerhandbuch

Wireless-G ADSL Gateway with SpeedBooster
The Factory Defaults Tab
If you want to restore the Gateway's factory default settings, then use this screen.
Factory Defaults
Restore Factory Defaults. If you wish to restore the Gateway to its factory default settings and lose all your
settings, click Restore Factory Defaults. Then follow the on-screen instructions. Click Help for more
information.
The Firmware Upgrade Tab
Use this screen to upgrade the Gateway's firmware.

Firmware Upgrade

To upgrade the Gateway's firmware:
1. Download the Gateway's firmware upgrade file from www.linksys.com/international.
2. Extract the file on your computer.
3. On the Firmware Upgrade screen, click the Browse button to find the firmware upgrade file.
4. Double-click the firmware file that you have downloaded and extracted.
5. Click the Start to Upgrade button, and follow the on-screen instructions.
Click Help for more information.
Chapter 6: Configuring the Wireless-G ADSL Gateway with SpeedBooster
The Administration Tab
Figure 6-40: Factory Defaults
Figure 6-41: Firmware Upgrade
58