Herunterladen Diese Seite drucken

Cisco Systems Linksys AG041 Kurzanleitung

Adsl-gateway mit 4-port-switch

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 25
All manuals and user guides at all-guides.com
®
A Division of Cisco Systems, Inc.
Package Contents
• ADSL Gateway
• User Guide on CD-ROM
• Ethernet Network Cable
• Phone Cable
• Power Adapter
• Microfilter or splitter (not supplied with
all models)
• Quick Installation
ADSL Gateway
with 4-Port Switch
Quick Installation Guide
WIRED
AG041 (EU)
Model No.

Werbung

loading

Inhaltszusammenfassung für Cisco Systems Linksys AG041

  • Seite 1 All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Package Contents • ADSL Gateway • User Guide on CD-ROM • Ethernet Network Cable • Phone Cable • Power Adapter • Microfilter or splitter (not supplied with all models) •...
  • Seite 2 Connect the ADSL Gateway All manuals and user guides at all-guides.com In Step 1, you will connect the Gateway to your ADSL line and to the computers in your home or business. First, make sure that all the devices that you’ll be working with are powered down, including your PCs and the Gateway.
  • Seite 3 All manuals and user guides at all-guides.com If you are connecting more than four PCs to the Gateway, you will also need to connect a hub or switch to the Gateway. NOTE: If your PC’s Ethernet adapter is not set up, refer to the Ethernet adapter’s user guide for more information.
  • Seite 4 Configure the ADSL Gateway All manuals and user guides at all-guides.com In Step 2, you will configure the Gateway to be able to gain access to the Internet through your Internet Service Provider (ISP). You will need the setup information provided by your ADSL ISP .
  • Seite 5 All manuals and user guides at all-guides.com The Basic Setup screen will appear with the Setup tab selected. Based on the setup instructions from your ISP , you may need to provide the following information. ADSL Settings. The Gateway supports five Encapsulations: RFC 1483 Bridged, RFC 1483 Routed, RFC 2516 PPPoE, RFC 2364 PPPoA, and Bridged...
  • Seite 6: Static Ip Address

    All manuals and user guides at all-guides.com 1 RFC 1483 Bridged Dynamic IP Address If your ISP says that you are connecting through a dynamic IP address, perform these steps: Select RFC 1483 Bridged for the Encapsulation. Select Obtain an IP Address Automatically for the IP Set- ting.
  • Seite 7 All manuals and user guides at all-guides.com Enter the DNS in the Primary and/or Secondary fields. You need to enter at least one DNS address. Click the Save Settings button to save the settings. 2 RFC 2516 PPPoE or RFC 2364 PPPoA If your ISP says that you are connecting through PPPoE or PPPoA,...
  • Seite 8 Technical Support Insert. You can also e-mail for further support. Website http://www.linksys.com/international Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2004 Cisco Systems, Inc. All rights reserved. AG041-QI-EU-40429NCBW...
  • Seite 9 All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Pakkens indhold • ADSL-gatewayen • Brugervejledning på cd-rom (kun på engelsk) • Ethernet-kabel • Telefonledning • Strømforsyning • Mikrofilter eller fordeler (følger ikke med alle modeller) •...
  • Seite 10 All manuals and user guides at all-guides.com Tilslutning af ADSL-gatewayen I trin 1 tilslutter du gatewayen til ADSL-linjen og til computerne i dit hjem/din virksomhed. Kontroller først, at alle de involverede enheder er slukket, herunder dine pc'er og gatewayen. Tilslut den ene ende af den medfølgende telefonledning til ADSL-vægstikket.
  • Seite 11 All manuals and user guides at all-guides.com Hvis du tilslutter mere end fire pc'er til gatewayen, skal du også tilslutte en hub eller switch til gatewayen. BEMÆRK: Hvis pc'ens Ethernet- adapter ikke er konfigureret, skal du se brugervejledningen til Ethernet-adapteren for at få...
  • Seite 12 All manuals and user guides at all-guides.com Konfiguration af ADSL-gatewayen I trin 2 konfigurerer du Linksys Trådløs-G ADSL-gatewayen, så du kan oprette adgang til internettet via din internetudbyder. Du skal have konfigurationsoplysningerne af din ADSL-udbyder. Hvis du ikke har disse oplysninger, skal du kontakte udbyderen, før du fortsætter.
  • Seite 13 All manuals and user guides at all-guides.com admin med små bogstaver i feltet Password (Adgangskode) (admin er standardbrugernavnet og -adgangskoden.) Klik derefter på knappen OK. Skærmbilledet Basic Setup vises med fanen Setup valgt. (Figur C) Afhængigt af konfigurationsvejledningen fra din internetudbyder skal du muligvis angive følgende oplysninger.
  • Seite 14: Hurtig Installation

    All manuals and user guides at all-guides.com 1 RFC 1483 Bridged Dynamisk IP-adresse Hvis din internetudbyder har oplyst, at du opretter forbindelse via en dynamisk IP-adresse (Figur D1), skal du følge nedenstående fremgangsmåde: Vælg RFC 1483 Bridged som indkapslingsmetode. Vælg Obtain an IP Address Dynamisk Automatically som IP-indstilling.
  • Seite 15 All manuals and user guides at all-guides.com Indtast DNS-adressen i feltet Primary og/eller Secondary. Du skal indtaste mindst én DNS-adresse. Klik på knappen Save Settings for at gemme indstillingerne. 2 RFC 2516 PPPoE eller RFC 2364 PPPoA Hvis din internetudbyder har oplyst, at du opretter forbindelse via PPPoE (Figur D3) eller PPPoA (Figur D4), eller hvis du normalt indtaster et brugernavn og en...
  • Seite 16 (se arket om teknisk support). Websted http://www.linksys.com /international Linksys er et registreret varemærke tilhørende Cisco Systems, Inc. og/eller Cisco Systems associerede selskaber i USA og visse andre andre lande. Copyright © 2004 Cisco Systems, Inc. Alle rettigheder forbeholdes. AG041-DK-QIG-40427NC BW...
  • Seite 17 All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Contenu de l'emballage • Passerelle ADSL • Guide de l'utilisateur sur CD-ROM (version anglaise uniquement) • Câble réseau Ethernet • Câble téléphonique • Adaptateur d'alimentation • Microfiltre(s) (ne sont pas livrés avec certains modèles)
  • Seite 18 All manuals and user guides at all-guides.com Connexion de la passerelle ADSL L'étape 1 consiste à connecter la passerelle à votre ligne ADSL ainsi qu'aux ordinateurs installés à domicile ou sur votre lieu de travail. Assurez-vous d'abord de la mise hors tension de tous les périphériques que vous allez utiliser, ordinateurs et passerelle inclus.
  • Seite 19 All manuals and user guides at all-guides.com Si vous raccordez plus de quatre ordinateurs à la passerelle, vous devrez également raccorder un concentrateur ou un commutateur à la passerelle. REMARQUE : Si la carte Ethernet de votre ordinateur n'est pas configurée, reportez-vous au guide de l'utilisateur de...
  • Seite 20 All manuals and user guides at all-guides.com Configuration de la passerelle ADSL A l'étape 2, vous configurerez votre passerelle ADSL sans fil G Linksys afin qu'elle puisse accéder à l'Internet par l'intermédiaire de votre Fournisseur d'accès Internet (FAI). Vous devrez avoir à...
  • Seite 21 All manuals and user guides at all-guides.com User Name (Nom d'utilisateur), puis admin en minuscules dans le champ Password (Mot de passe) (admin correspond aux nom d'utilisateur et mot de passe par défaut). Cliquez sur le bouton OK. L'écran Basic Setup (Configuration de base) apparaîtra en affichant son onglet Setup (Configuration).
  • Seite 22 All manuals and user guides at all-guides.com 1 RFC 1483 Bridged Adresse IP dynamique Si votre FAI vous indique que vous vous connectez par l'intermédiaire d'une adresse IP dynamique (Figure D1), exécutez la procédure ci-après : Sélectionnez RFC 1483 Bridged pour l'encapsulation. Sélectionnez Obtain an IP Address Automatically (Obtenir automatiquement...
  • Seite 23 All manuals and user guides at all-guides.com secondaire). Vous devez entrer au moins une adresse DNS. Cliquez sur le bouton Save Settings (Enregistrer paramètres) pour enregistrer les modifications apportées aux paramètres. 2 RFC 2516 PPPoE ou RFC 2364 PPPoA Si votre FAI vous indique que vous vous connectez par le biais du protocole PPPoE (Figure D3) ou PPPoA (Figure D4) ou si vous devez...
  • Seite 24 à la Fiche d'assistance technique. Site Web http://www.linksys.com/international Linksys est une marque déposée ou une marque commerciale de Cisco Systems, Inc. et/ou ses filiales aux États-Unis et dans certains autres pays. Copyright © 2004 Cisco Systems, Inc. Tous droits réservés. AG041-FR-QIG-40423NC BW...
  • Seite 25 All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Lieferumfang • ADSL-Gateway • Benutzerhandbuch auf CD-ROM (nur auf Englisch verfügbar) • Ethernet-Netzwerkkabel • Telefonkabel • Netzstromadapter • Mikrofilter (nicht im Lieferumfang aller Modellnummern enthalten) • Kurzanleitung...
  • Seite 26: Anschließen Des Adsl-Gateways

    All manuals and user guides at all-guides.com Anschließen des ADSL-Gateways In Schritt 1 schließen Sie das Gateway an Ihre ADSL-Verbindung und die Computer in Ihrer Heim- oder Unternehmensumgebung an. Überprüfen Sie zuerst, ob alle Geräte, mit denen Sie arbeiten (einschließlich PCs und Gateway), ausgeschaltet sind.
  • Seite 27 All manuals and user guides at all-guides.com Wenn mehr als vier PCs an das Gateway angeschlossen werden sollen, müssen Sie außerdem einen Hub oder Switch an das Gateway anschließen. HINWEIS: Wenn der Ethernet- Adapter des Computers nicht eingerichtet ist, finden Sie dazu weitere Informationen im Benutzerhandbuch zum Ethernet-Adapter.
  • Seite 28: Konfigurieren Des Adsl-Gateways

    All manuals and user guides at all-guides.com Konfigurieren des ADSL-Gateways In Schritt 2 konfigurieren Sie das Linksys Wireless-G ADSL-Gateway für den Zugriff auf das Internet über Ihren ISP . Sie benötigen hierzu die Setup- Informationen Ihres ADSL-ISPs. Wenn Sie nicht über diese Informationen verfügen, wenden Sie sich an Ihren ISP , bevor Sie beginnen.
  • Seite 29 All manuals and user guides at all-guides.com Das Fenster Basic Setup (Grundlegende Einrichtung) wird mit ausgewählter Registerkarte Setup angezeigt (Abbildung C). Je nach den Setup-Informationen von Ihrem ISP müssen Sie unter Umständen die folgenden Informationen eingeben: Virtual Circuit (Virtueller Kreis): Für diese Option sind zwei Einstellungen erforderlich, VPI (Virtual Path Identifier;...
  • Seite 30 All manuals and user guides at all-guides.com 1 RFC 1483 Bridged (RFC 1483- Überbrückung) Dynamische IP Adresse Wenn Sie laut ISP über eine dynamische IP- Adresse verbunden sind (Abbildung D1), führen Sie die folgenden Schritte aus: Wählen Sie als Kapselungsmethode RFC 1483 Bridged (RFC 1483- Überbrückung) aus.
  • Seite 31 All manuals and user guides at all-guides.com Geben Sie die DNS-Adressen in die Felder Primary DNS (Primärer DNS) und Secondary DNS (Sekundärer DNS) ein. Sie müssen mindestens eine DNS-Adresse eingeben. Klicken Sie auf die Schaltfläche Save Settings (Einstellungen speichern), um die Einstellungen zu speichern.
  • Seite 32 Kundendienst finden Sie in der technischen Support-Beilage. http://www.linksys.com/international Linksys ist eine eingetragene Marke bzw. eine Marke von Cisco Systems, Inc. und/oder deren Zweigunternehmen in den USA und anderen Ländern. Copyright © 2004 Cisco Systems, Inc. Alle Rechte vorbehalten. AG041-DE-QIG-40423NC BW...
  • Seite 33: Guida Di Installazione Rapida

    All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Contenuto della confezione • ADSL Gateway • User Guide (Guida per l'utente) su CD-ROM (Guida per l'utente, solo in inglese) • Cavo di rete Ethernet • Cavo telefonico •...
  • Seite 34 All manuals and user guides at all-guides.com Collegamento del gateway ADSL Nella fase 1 il gateway viene collegato alla linea ADSL e ai computer di casa o dell'ufficio. Per prima cosa, verificare che tutti i dispositivi da utilizzare siano spenti, compresi i PC e il gateway.
  • Seite 35 All manuals and user guides at all-guides.com Se si collegano più di quattro PC al gateway, occorre collegare anche un hub o uno switch al gateway. NOTA Se l'adattatore Ethernet del PC non è configurato, consultare la relativa documentazione per istruzioni.
  • Seite 36 All manuals and user guides at all-guides.com Configurazione del gateway ADSL Nella fase 2 viene configurato il Gateway ADSL Wireless-G di Linksys in modo che sia in grado di accedere a Internet attraverso il provider di servizi in uso. È necessario disporre delle informazioni sulla configurazione fornite dal provider di servizi Internet ADSL.
  • Seite 37 All manuals and user guides at all-guides.com Name (Nome utente) e Password (admin È il nome utente e la password predefinita). Quindi, fare clic sul pulsante OK. Viene visualizzata la schermata Basic Setup (Configurazione di base) in cui è selezionata la scheda Setup (Configurazione) (Figura C).
  • Seite 38 All manuals and user guides at all-guides.com 1 RFC 1483 Bridged (Bridging RFC 1483) Indirizzo IP dinamico Se il provider di servizi Internet fornisce una connessione tramite un indirizzo IP dinamico (Figura D1), attenersi alla seguente procedura: Selezionare RFC 1483 Bridged (Bridging RFC 1483) per l'incapsulamento.
  • Seite 39 All manuals and user guides at all-guides.com Immettere gli indirizzi DNS nei campi Primary DNS (DNS primario) e Secondary DNS (DNS secondario). È necessario specificare almeno un indirizzo DNS. Fare clic sul pulsante Save Settings (Salva impostazioni) per salvare le impostazioni. 2 RFC 2516 PPPoE o RFC 2364 PPPoA Se il provider di servizi Internet fornisce...
  • Seite 40 Sito Web http://www.linksys.com/international Linksys è un marchio registrato o un marchio di Cisco Systems, Inc. e/o dei relativi affiliati negli Stati Uniti e in altri paesi. Copyright © 2004 Cisco Systems, Inc. Tutti i diritti riservati. AG041-IT-QIG-40427NC BW...
  • Seite 41: Instalação Rápida

    All manuals and user guides at all-guides.com ® ® A Division of Cisco Systems, Inc. A Division of Cisco Systems, Inc. Conteúdo da embalagem • Gateway ADSL • Manual do Utilizador em CD-ROM (disponível apenas em inglês) • Cabo de rede Ethernet •...
  • Seite 42 All manuals and user guides at all-guides.com Ligar o Gateway ADSL No Passo 1, ligará o Gateway à linha ADSL e aos computadores em casa ou na empresa. Primeiro, certifique-se de que todos os dispositivos com que irá trabalhar estão desligados, incluindo os computadores e o Gateway.
  • Seite 43 All manuals and user guides at all-guides.com quatro computadores ao Gateway, também será necessário ligar um concentrador ou comutador ao Gateway. NOTA: Se a placa Ethernet do computador não estiver configurada, consulte o manual do utilizador da placa Ethernet para obter mais informações.
  • Seite 44 All manuals and user guides at all-guides.com Configurar o Gateway ADSL No Passo 2, configurará o Gateway ADSL sem fios G da Linksys para conseguir aceder à Internet através do Fornecedor de serviços Internet (ISP). Necessitará das informações de configuração fornecidas pelo ISP do serviço de ADSL.
  • Seite 45 All manuals and user guides at all-guides.com User Name (Nome de utilizador) e introduza admin em minúsculas no campo Password (Palavra-passe) (admin é o nome de utilizador e palavra-passe predefinidos). Em seguida, clique no botão OK. Será apresentado o ecrã Basic Setup (Configuração básica) com o separador Setup (Configurar) seleccionado.
  • Seite 46 All manuals and user guides at all-guides.com 1 RFC 1483 Bridged Endereço IP dinâmico Se o ISP indicar que está a estabelecer ligação através de um endereço IP dinâmico (Figura D1), execute os seguintes passos: Seleccione RFC 1483 Bridged como Encapsulation (Encapsulamento).
  • Seite 47 All manuals and user guides at all-guides.com Introduza o Default Gateway address (Endereço predefinido do gateway). Introduza o DNS nos campos Primary (Primário) e/ou Secondary (Secundário). É necessário introduzir pelo menos um endereço de DNS. Clique no botão Save Settings (Guardar definições) para guardar as definições.
  • Seite 48 Suporte técnico, consulte a Folha de suporte técnico. Web site http://www.linksys.com/international Linksys é uma marca registada ou marca comercial da Cisco Systems, Inc. e/ou das respectivas filiais nos E.U.A. e noutros países. Copyright © 2004 Cisco Systems, Inc. Todos os direitos reservados. AG041-PT-QIG-40427NC BW...
  • Seite 49: Instalación Rápida

    All manuals and user guides at all-guides.com ® A Division of Cisco Systems, Inc. Contenido del paquete • Puerta de enlace ADSL • Guía del usuario en CD-ROM (sólo en ingles) • Cable de red Ethernet • Cable telefónico • Adaptador de corriente •...
  • Seite 50 All manuals and user guides at all-guides.com Conecte la puerta de enlace ADSL En el paso 1, debe conectar la puerta de enlace a la línea ADSL y a los ordenadores de casa o de la oficina. En primer lugar, asegúrese de que todos los dispositivos con los que va a trabajar están apagados, incluyendo los PC y la puerta de enlace.
  • Seite 51 All manuals and user guides at all-guides.com Si va a conectar más de cuatro PC a la puerta de enlace, también deberá conectar un concentrador o conmutador a la misma. NOTA: Si el adaptador Ethernet del ordenador no está configurado, consulte la guía del usuario del mismo para obtener más información.
  • Seite 52 All manuals and user guides at all-guides.com Configure la puerta de enlace ADSL En el paso 2, debe configurar la puerta de enlace ADSL Wireless-G de Linksys para poder acceder a Internet mediante un proveedor de servicios de Internet (ISP). Necesitará la información proporcionada por el ISP de ADSL.
  • Seite 53 All manuals and user guides at all-guides.com Nombre de usuario y de nuevo en el campo Contraseña (admin es el nombre de usuario y la contraseña predeterminados). A continuación, haga clic en el botón Aceptar. Aparece la pantalla Basic Setup (Configuración básica) con la ficha Setup (Configurar) seleccionada.
  • Seite 54 All manuals and user guides at all-guides.com 1 RFC 1483 Bridged (RFC 1483 con puente) Dynamic IP Address (Dirección IP dinámica) Si el ISP indica que su conexión se realiza mediante una dirección IP dinámica (figura D1), siga estos pasos: En Encapsulation (Encapsulación), seleccione RFC 1483 Bridged (RFC 1483 con...
  • Seite 55 All manuals and user guides at all-guides.com Introduzca la dirección de la puerta de enlace predeterminada (Default Gateway). Introduzca la dirección DNS en los campos correspondientes a las direcciones DNS principal (Primary) y secundaria (Secondary). Debe introducir por lo menos una dirección DNS. Haga clic en el botón Save Settings (Guardar parámetros) para guardar los parámetros.
  • Seite 56 Página Web http://www.linksys.com/international Linksys es una marca comercial registrada o marca comercial de Cisco Systems, Inc. y/o sus filiales de EE.UU. y otros países. Copyright © 2004 Cisco Systems, Inc. Todos los derechos reservados. AG041-ES-QIG-40427NC BW...
  • Seite 57 All manuals and user guides at all-guides.com ® ® A Division of Cisco Systems, Inc. A Division of Cisco Systems, Inc. Innehåll i förpackningen • ADSL Gateway • Användarhandbok på cd-skiva • Ethernet-nätverkskabel • Telefonkabel • Strömadapter • Mikrofilter eller signaldelare (medföljer inte alla modeller) •...
  • Seite 58 All manuals and user guides at all-guides.com Ansluta ADSL-gatewayen I steg 1 ansluter du gatewayen till ADSL-linjen och till datorerna hemma eller på jobbet. Börja med att kontrollera att alla aktuella enheter är avstängda, inklusive dator och gateway. Anslut den ena änden av medföljande telefonkabel till det vägguttag där ADSL-tjänsten installerats.
  • Seite 59 All manuals and user guides at all-guides.com Om du ansluter fler än fyra datorer måste du också ansluta en hub eller switch till gatewayen. OBS! Om datorns Ethernet- adapter inte har konfigurerats finns mer information om hur du går tillväga i användarhandboken till Ethernet-adaptern.
  • Seite 60 All manuals and user guides at all-guides.com Konfigurera ADSL-gatewayen I steg 2 konfigurerar du Linksys Wireless- G ADSL Gateway så att du får åtkomst till Internet genom din Internet- leverantör. Du behöver inställningsinformationen från din ADSL-leverantör. Om du inte har tillgång till denna information bör du kontakta leverantören innan du fortsätter.
  • Seite 61 All manuals and user guides at all-guides.com Lösenord. (admin är det standardinställda användarnamnet och lösenordet.) Klicka på OK. Skärmen Basic Setup (Grundläggande inställningar) visas med fliken Setup (Inställningar) vald (bild C). Beroende på inställningsanvisningarna från Internet-leverantören kan du behöva uppge följande information: Virtual Circuit (VPI och VCI) (Virtuell krets): Dessa fält består...
  • Seite 62 All manuals and user guides at all-guides.com 1 RFC 1483 Bridged (Bryggkopplad) Dynamisk IP-adress Om Internet-leverantören anger att du ska ansluta till Internet via en dynamisk IP-adress (bild D1) ska du följa dessa steg: Välj RFC 1483 Bridged (Bryggkopplad) vid Encapsulation (Inkapsling).
  • Seite 63 All manuals and user guides at all-guides.com Skriv DNS-adressen i fältet Primary (Primär) eller Secondary (Sekundär). Du måste ange minst en DNS-adress. Spara inställningarna genom att klicka på Save Settings (Spara inställningar). 2 RFC 2516 PPPoE eller RFC 2364 PPPoA Om Internet-leverantören anger att du ska ansluta till Internet via PPPoE (bild D3) eller PPPoA (bild D4), eller om du...
  • Seite 64 Webbplats http://www.linksys.com /international Linksys är ett registrerat varumärke eller ett varumärke som tillhör Cisco Systems, Inc. och/ eller dess samarbetspartner i USA och vissa andra länder. Copyright © 2004 Cisco Systems, Inc. Med ensamrätt.