ninco4rc 1/16 SPARK RTR 2,4 GHZ Handbuch Seite 6

Please read carefully the instructions before using the car.
FEATURES:
NH93050-51 – 1/16 SPARK 2,4 Ghz
Length Width
245mm 177mm
NH93053 – 1/16 CHEYENNE 2,4 GHZ
Length Width
300mm 177mm
CONTENTS:
Items needed for running
NOTE:
-Charge the battery for 8-10 hours for the first time usage. Do not charge the battery
unattended.
-When the car is blocked, do not continue to pull/push the trigger, this will cause the ESC
to overheat and damage the ESC
The following items, not included in the kit, are required for assembling your model:
Hexagonal screwdriver
Scissors
Height Wheel
base
95mm 155mm
Height Wheel
base
115mm 155mm
Car
Transmitter 2,4Ghz
Motor
PBC 3-1 (Servo-ESC-RX)
Battery Ni-MH 7,2v 1100mAh
8 AA batteries required
4-way cross wrench
needle nose cutter
Gear Ground
ratio clearance
1:8,8 15mm
Gear Ground
ratio clearance
1:8,8 18mm
4-way cross wrench
Wire cutter
ENGLISH
Wheel Wheel
diameter width
58mm 26mm
Wheel Wheel
diameter width
58mm 26mm
mini screwdriver
Motor
Rc370
Motor
Rc370
6