Herunterladen Inhalt Inhalt Diese Seite drucken

Bedienung Der Anlage (Kurzanleitung); Operating The System (Quick Reference); Utilisation De Système (Instructions Sommaires) - Oyster Vision III Montageanleitung

Inhaltsverzeichnis

Werbung

Bedienung der Anlage (Kurzanleitung)

Operating the system (quick reference)

Utilisation de système (instructions sommaires)
Beachten Sie bitte vor dem Einschalten, dass Sie freie Sicht nach Süden haben, denn sonst ist kein Satelliten-
Empfang möglich.
1. Schalten Sie Ihr TV-Gerät und den Receiver ein und stellen Sie am Receiver
ein empfangbares Programm ein.
2. Drücken Sie zum Einschalten des Systems auf die Taste
Alles weitere bis zur Bild-Übertragung funktioniert ab jetzt vollautomatisch.
Die Antenne fährt grundsätzlich zuerst in die letzte Empfangsposition.
Benützen Sie die Anlage das erste Mal, bzw. haben Sie Ihren Standort gewechselt, so kann das System in der letzten
Empfangsposition kein Bild auswerten und es beginnt die „Vollautomatische Suche". Anschließend erhalten Sie sofort Ihr
Fernsehbild.
Haben Sie die Anlage an dem gleichen Standort und in der gleichen Fahrzeugposition schon einmal benützt, so empfängt
sie ohne Suche sofort in der letzten Empfangsposition.
Deutschsprachiges Programm wird in der Regel über den Satelliten Astra1 übertragen, der in den meisten Teilen Europas
auch mit der Spiegelgröße 65 cm empfangen werden kann.
In manchen Regionen (z.B. in Griechenland, in der Türkei) strahlt der Satellit Astra keine ausreichenden Signale aus und
kann daher nicht empfangen werden. Wählen Sie dann einen anderen Suchsatelliten, z.B. Eutelsat-Hotbird (siehe aus-
führliche Bedienungsanleitung).
Nach erfolgter Satellitenfi ndung schalten Sie die Programme mit Ihrer Receiver-Fernbedienung um.
Ausgeschaltet wird das System durch Drücken der Taste
1. Switch on your TV set and the receiver and select a receivable programme at
the receiver.
2. Press
at the control panel to switch on the system.
That's all you have to do – anything else required to receive a TV image will happen automatically.
The antenna will always move into the last reception position.
If you use the system for the fi rst time or if you have moved the system to a different location, the system will not recei-
ve a signal in this position and hence starts the „automatic search". This will soon yield a TV picture.
If you have used the system at the same location and in the same vehicle position before, then it will immediately receive
signals without a prior search.
English-language channels are mostly transmitted via Astra II, which can be received in most parts of Europe with a 85-
cm parabolic antenna.
In some regions (e.g. in Greece, Turkey) the Astra signals are too weak to be received. In this case, select a different
search satellite such as Hotbird/Eutelsat (see comprehensive Operating Instructions).
Once the satellite has been found, you can select channels with the remote control of your receiver.
To switch off the system, press
at the control panel. The antenna will retract and the system will switch off.
am Bedienteil.
am Bedienteil. Die Anlage fährt dann ein und schaltet ab.
30

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Oyster Vision III

Inhaltsverzeichnis