Inhaltsverzeichnis
Werbung
Do not tighten the union nut of the elbow fi tting before having adjusted the length of the cable on the roof*.
Dealing of the lead - through roof
Sikaflex on
screws and
screw nuts
Important:
After sealing and drying -
verify the impermeability!
d) Use the sealing compound to seal all around the lower edge of the threaded
elbow joint and the self-tapping screws.
e) The cable can be coiled up if it is too long inside the vehicle.
Check the cable inlet, the self-tapping screws and the foot of the threaded elbow fi tting for leaks.
Sikaflex
all around
*Cabel length to adapt
on the roof
19
Werbung
Inhaltsverzeichnis
