Battery Test And Battery Replacement; Technical Specifications - Simons Voss Technologies WaveNet Kurzanleitung

WaveNet-Funktester
5 Battery test and battery replace-
Ready LED lights (4 seconds)
Error-LED lights up (4 seconds)
No response

6 Technical specifications

Radio emissions
SRD (WaveNet)
SRD (WaveNet)
Handset
EN
ment
You will find the battery on the right side of the mobile
station.
Battery inserted.
ü
Switch on the mobile device with the on/off toggle

switch.
9 All LEDs light up temporarily.
Battery status is indicated by the Ready or Error
9
LED (see table).
You can obtain the required battery from SimonsVoss
Technologies GmbH.
868.000 MHz -
868.600 MHz
869.700 MHz -
870.000 MHz
There are no geographical restrictions within the EU.
5. Battery test and battery re-
Battery full.
Battery empty. Replace the bat-
tery.
Battery completely discharged.
Replace the battery.
<25 mW ERP
<5 mW ERP
placement
29 / 108