Bresser National Geographic 9057000 Bedienungsanleitung Seite 9

Scope of delivery
Spotting scope
Table tripod
Nylon carry case
Cleaning cloth
Fastening the scope on the tripod
Take the scope out of the packaging and pull out
the tripod legs (11) as far as they can go. Place the
tripod on an even, stable base, like a table.
Your scope has a normed tripod adaptor thread (5),
which can be screwed onto the tripod adapter thread
screw (9) on the tripod. After attaching, tighten the
fixing screw (10) beneath the tripod head.
Aligning the scope for viewing
Unlock the vertical and horizontal axes (12) by turn-
ing the panning handle (13) anticlockwise.
Now you can move scope, attached to the tripod
head, on both axes (vertical and horizontal), for opti-
mal positioning. When you have reached the desired
observing position, the scope can be locked by turn-
ing the panning handle (13) clockwise.
Controls
• Focus:
Look into the eyepiece (1) and rotate the focus
wheel (3) in either direction to focus on an object.
Keep turning the wheel until you can see the image
clearly.
• Zoom:
Rotate the zoom control (2) to zoom in or out on an
object; then use the focus knob (3) to refocus.
• Moving the main tube:
This spotting scope has a main tube clamp (6) and
fastening screw (7). Turn the screw (7) anticlockwise
to unfasten the main tube clamp. You can then turn
the entire main tube (4) about its own axis to vary the
eyepiece (1) position.
EN
9