FLAMEROCK Pellet 55 Sicherheit, Montage, Betrieb Und Wartung Seite 14

Power button of the device (Power indication function included)
Unit switch button
The Fahrenheit temperature is displayed by default. When it is on, it can display Celsius temperature, and
it can be switched back to Fahrenheit. The corresponding icon °C on the LCD will automatically switch.
Manual pellet feeding button
It will continually feed the pellet when you keep pressing the button. And will change to program feeding
after releasing the button.
Left is for PROBE 1 and right for PROBE 2.
Temperature switch knob
Position temperature indication
Actual temperature for PROBE 1 and PROBE 2
Actual temperature for grill body probe
Fan Work
Fan start working after machine starts. Fan will keep running for 10 min after machine shut off or temperature
decrease to 55 °C.
Fire Rod Work
1) First ignition, keep pressing the power button, the ignition rod will run for 8 min after motor running 1 min.
2) The grill will restart ignition when temperature less than 55 °C restart and will stop ignition when temperature
higher than 77 °C.
3) When temperature less than -10 °C, when set at 120 °C (For example, temperature less than 110 °C), the ignition
on/off 5 min, shut off the ignition after temperature increased -10 °C.
Feeding Motor
1) Pellet feeding off 15s and on 30 feeding. It will start 2nd feeding after detection temperature increases 5 °C.
2) Pellet feeding, will continue PID feeding when detection temperature higher than 55 °C. If less than 55 °C, will
start 2nd feeding, off 15s and on 30s feeding, temperature less than 55 °C 6 min later, start ERL protection.
14
The indication is off when the device is off.
The indication of blue light is on when the device is on.