Inhaltsverzeichnis
Werbung
Ignition Instruction
Before each ignition, clean up the residual ash in the burning chamber. Then add new pellets to the control box,
it is better not to exceed the filter screen of the control box (about 2/3); put small amount of new pellets into the
burning chamber, and it is best that the pellets covers the ignition rod 1~2 layers in a pyramid shape. Then put
the fire-block plate, oil guide plate and grilling grate and then close the cover, turn on the Power button and
choose the required mode.
Not exceeding the
filter screen
The device begins to ignite. White smoke will be emitted during the ignition of the pellets, and personnel can
stay away from the operating device before the completion of the ignition.
What needs to pay attention is, to save power, the ignition rod will work only when the Cook or Smoke mode is
first selected after powering on, and it will not work in other conditions, so if the pellets are found not ignited,
you should turn off the Power button first and turn on the Power button again and choose corresponding mode
to ignite again.
Turn off the Device
To safely turn off the grill follow the steps below:
1) Open the upper cover of the control box, remove the residual pellets from the box and keep it properly for
next use.
2) Let the grill continue to work 5 to ten minutes to discharge the pellets in the feeder.
3) Next, click Power button to turn off the device, but do not unplug the power right now. At this time, the cooling
fan will continue to work for 5 minutes until the pellets are burned off and extinguished.
4) Finally, please unplug the power, and store the grill in a cool and ventilated place to avoid sun exposure and
heavy rain.
12
12
igniter
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
Fehlerbehebung
