Dynamic Range Control - Dab - Sangean DPR-65 Bedienungsanleitung

Downloaded from www.Manualslib.com
Dynamic Range Control settings – DAB
Dynamic Range Control (also known as DRC) can make quieter sounds
easier to hear when your radio is used in a noisy environment.
1. Press the Power On/Off button to switch on your radio.
2. Press and hold the Info button. The display will show "Station list".
3. Press the Tuning Up/Down buttons until the display shows
"DRC value".
4. Press and release the Select button to enter the setting.
5. Press the Tuning Up/Down buttons to select the required DRC
setting (the default is 0).
DRC 0 – DRC is switched off, Broadcast DRC will be ignored.
DRC 1 – DRC is set as sent by broadcaster.
DRC 1/2 – DRC level is set to 1/2 that sent by broadcaster.
6. Press and release the Select button to confirm the setting. The display
will return to normal tuning mode.
Note:
Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
manuals search engine
GB
16