Care And Cleaning; General Information; Troubleshooting - Zanussi ZEE6940FXA Benutzerinformation

Care and cleaning

WARNING!
Refer to Safety chapters.

General information

• Clean the hob after each use.
• Always use cookware with clean bottom.
• Scratches or dark stains on the surface have
no effect on how the hob operates.
Stainless steel
• For stainless steel edges of the hob use a
special cleaner applicable for the stainless
steel.
• The stainless steel edge of the plate can
change the colour as a result of high
temperature.

Troubleshooting

WARNING!
Refer to Safety chapters.
What to do if...
Problem
You cannot activate or operate
the hob.
If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Make sure, you operated the hob
correctly. If not the servicing by a service
www.zanussi.com
• Wash stainless steel parts with water, and
Cleaning the electric hotplate
1. Use the cleaning powder or the cleaning
2. Clean the hob with a moist cloth and some
3. Heat the hotplate to a low temperature and
4. To keep the hotplates in good shape, rub in
Possible cause
The hob is not connected to an
electrical supply or it is connec-
ted incorrectly.
The fuse is blown.
technician or dealer will not be free of charge,
also during the warranty period. The instructions
about the Service Centre and conditions of
guarantee are in the guarantee booklet.
then dry them with a soft cloth.
pad.
detergent.
let it dry.
a sewing machine oil regularly. Polish off
the oil with absorbent paper.
Check if the hob is correctly con-
nected to the electrical supply.
Refer to the connection diagram.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
Remedy
17