Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
USB-C™ to VGA multiport adapter
Item no. 1529594
Intended use
The product is intended for connecting to a computer with USB-C™ port, providing the following
additional interfaces:
• VGA port (for connecting a monitor/projector)
• USB-C™ port (charging port; no data transfer possible)
• USB 3.0 port (e.g. for connecting a mouse, keyboard or hard drive)
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as short circuits or fire. Read the instructions carefully
and store them in a safe place. Make this product available to third parties only together with
its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Multiport adapter
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• Make sure the cable is not jammed or crushed!
• Do not install the product near strong magnetic fields, e.g. near machines or
speakers.
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated could destroy the product. Allow
the product to reach room temperature before connecting it to an appliance. This
may take several hours.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or an
authorized repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operation
• Connect the plug to a USB-C™ port on your computer.
You can connect the product to a suitable smartphone running Windows
your smartphone display on a monitor or projector.
At the time this manual was written, Android smartphones were not supported.
• Connect your monitor or projector to the VGA port.
• Connect a USB device (e.g. mouse, keyboard, hard drive) to the USB 3.0 port.
• If the product is connected to a notebook, you can charge your notebook via the USB-C™
port. Connect the power adapter of your notebook to the USB-C™ port.
To use this feature, your notebook must support the specification "USB Power
Delivery" (PD).
Care and cleaning
• Disconnect the product from all connected devices before cleaning.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the casing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be disposed of in household
waste. Always dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Plug .............................................. USB-C™
Sockets ......................................... 1 x VGA, 1 x USB 3.0, 1 x USB-C™
Shield ............................................ braid and foil shielding
Inner conductor material ............... copper
Contacts ....................................... gold-plated
Resolution ..................................... max. 1080p @ 60 Hz
Operating conditions ..................... -10 to +60 °C, 20 – 80 % RH
Storage conditions ........................ -20 to +80 °C, 10 – 90 % RH
Cable length ................................. 14 cm
Dimensions (W x H x D) ............... 80 x 15 x 52 mm
Weight .......................................... 64.7 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
to mirror
®
*1529594_v2_1017_02_IPL_m_en
Werbung
