Ssi; Counts Ssi-Bits; Ssi-Code; Ssi-Frequency Master-Mode - TR-Electronic HID V5 Installationsanleitung

Programming

5.5 SSI

5.5.1 Counts SSI-Bits

5.5.2 SSI-Code

5.5.3 SSI-Frequency Master-Mode

5.5.4 SSI-Cycle Master-mode

 TR-Electronic GmbH 2014, All Rights Reserved
Page 30 of 32
Downloaded from www.Manualslib.com
The parameter Number of data bits defines the number of reserved bits for the
measuring system position.
lower limit
upper limit
default
Selection
Binary
Gray
If the adapter is used as SSI master, with this parameter the SSI transfer rate can be
set.
Selection Description
750 kHz SSI transfer rate 750 kHz
400 kHz SSI transfer rate 400 kHz
250 kHz SSI transfer rate 250 kHz
200 kHz SSI transfer rate 200 kHz
125 kHz SSI transfer rate 125 kHz
If the adapter is used as SSI master, with this parameter the SSI cycle time can be
set.
Selection Description
300 s SSI cycle time 300 s
400 s SSI cycle time 400 s
500 s SSI cycle time 500 s
1 ms SSI cycle time 1 ms
2 ms SSI cycle time 2 ms
5 ms SSI cycle time 5 ms
10 ms SSI cycle time 10 ms
manuals search engine
12
31
24
Description
SSI output code = Binary
SSI output code = Gray
TR - E - TI - DGB - 0103 - 05
Default
X
Default
X
Default
X
Printed in the Federal Republic of Germany
06/21/2016