Installation & Mounting - True Systems P-Solo Ribbon Bedienungsanleitung

INSTALLATION & MOUNTING
INSTALLATION
Unpacking and Inspection
We recommend that you inspect your
P-SOLO
from the factory shipping carton. In the
unlikely event that the unit exhibits any
physical damage, DO NOT connect it to
the AC mains power, but contact your
dealer immediately.
In addition to the P-SOLO
shipping carton should also include:
• AC power cord
•
Operation Manual
•
Warranty registration card
We recommend that you keep the ship-
ping carton and foam inserts in the event
that the unit must be shipped at some
time in the future. DO NOT package the
unit in "packing peanuts" or similar mate-
rial as it will settle during shipping and
damage may occur. If original packing
materials cannot be located, wrap the
unit with plastic "bubble wrap" material
extending at least 2" beyond the extrem-
ities of the P-SOLO
TRUE systems
Downloaded from www.Manualslib.com
upon unpacking it
enclosure.
manuals search engine
22
MOUNTING
The P-SOLO
placement on your desktop, or any con-
venient flat surface. It's light weight and
compact enclosure make it easy to carry
by hand or in your gig bag.
• Do not locate the unit where it is
exposed to rain, moisture, or liquid
spills.
, the • Do not locate the unit where it is
exposed to temperature extremes.
• Avoid locating the unit next to equip-
ment that emits strong electromag-
netic fields.
• Avoid using mic, output, or instru-
ment cables that are too short. While
the P-SOLO
for its size and shape, stepping or
pulling on a short, taught cable may
move it out of place,
possibly causing damage.
SOLO
is designed for
is quite stable