Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
Mini DisplayPort to VGA adapter cable
Item no. 1485272
Intended use
This product is designed to convert a Mini DisplayPort on a computer to a VGA port.
The adapter transmits the video signal from your computer or tablet to a display device (such
as a monitor or projector) via a VGA cable (available separately). The gold-plated connections
are anti-corrosive and improve signal transmission.
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture,
e.g. in bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
DisplayPort (DP) is a registered trademark of the Video Electronics Standard Association.
Delivery content
• Adapter cable
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
above. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in the triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• When setting up the product, make sure that the cable is not pinched, kinked or
damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
• Never use the product immediately after it has been brought from a cold room into
a warm one. The condensation generated could destroy the product. Allow the
product to reach room temperature before connecting it to the power supply and
putting it to use. This may take several hours.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult an expert when in doubt about the operation, safety or connection of this
product.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operation
The adapter is unidirectional. It cannot be used to convert a VGA signal to a Mini
DisplayPort signal.
Do not connect the adapter to other devices or adapters in series. Connect the
adapter directly to the Mini DisplayPort signal source.
• Ensure that all devices that are connected to the adapter are switched off.
• Connect the plug on the adapter to the Mini DisplayPort on your computer.
• Use a suitable cable to connect a VGA monitor to the VGA socket on the adapter.
• The display device must support the resolution of the playback device, otherwise the monitor
may not display an image, or the image may be distorted. If necessary, select a lower
resolution on your playback device or use a monitor/projector with a higher resolution.
• Turn on all devices that are connected to the adapter. The adapter is now ready to use and
the LED will turn on.
You do not need to install any drivers.
The adapter functions independently of the computer's operating system.
Care and cleaning
• Before cleaning the product, turn off all connected devices and unplug all connected cables.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the casing or even impair the functioning of the product.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Power supply ................................Via Mini DisplayPort
Connection ................................... 1x Mini DisplayPort plug
1x VGA socket (D-sub 15-pin)
Supported resolution ....................Up to 1920 x 1080 Pixel, 60 Hz (progressive scan)
DisplayPort standard .................... 1.2 standard (backwards compatible to 1.1a)
Shielding .......................................Braided and foil shielding
Inner conductor material ...............Copper
Chipset .........................................Analogix ANX9833
Operating conditions ..................... 0 to +60 °C, 10 – 90 % relative humidity
(non-condensing)
Storage conditions ........................ -10 to +70 °C, 10 – 90 % relative humidity
(non-condensing)
Dimensions (W x H x D) ...............46.5 x 45.5 x 15.5 mm (without cable)
Cable length .................................70 mm
Weight ..........................................Approx. 28.5 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
*1485272_v1_0816_02_DS_m_(1)_4L
Werbung
