3
Entfernen Sie die Silikonnaht
mit einem geeigneten
Werkzeug.
Remove the silicone seam
with a suitable tool.
4
Streuteller runterklappen und
altes Abdeckblech und Trichter
entfernen.
Anschließend das neue
Abdeckblech und den Trichter in
umgekehrter Reihenfolge wieder
montieren.
Fold down the spreading plate
and remove the old cover plate
and funnel.
Then refit the new cover plate and
funnel in reverse order.
Unbedingt wieder Silikonnaht am Trichterblech hinten aufziehen!
Be sure to re-attach the silicone seam on the funnel plate at the back!