Set Up Settings Menu; Setting The Pc2/Component2 Connectors; Setting The Pc1 Connector; Setting High Definition Images To The Suitable Screen Size - Pioneer PDP-615EX Bedienungsanleitung

SET UP Settings Menu

Setting the PC2/COMPONENT2 connectors

Select whether to set the PC2/COMPONENT2 input to
RGB and component or SCART1,2.
Example: Set the BNC INPUT mode to "RGB"
On "BNC INPUT" of "SET UP" menu, select "RGB".
SET UP
LANGUAGE
BNC INPUT
D-SUB INPUT
HD SELECT
RGB SELECT
HDMI SET UP
COLOR SYSTEM
BACK GROUND
SIDE MASK
S1/S2
DISPLAY OSD
OSD ADJUST
ALL RESET
SEL. ADJ.
Information
BNC INPUT Settings
RGB: Use the 5BNC terminals for HD, VD and RGB
signals.
COMPONENT: Use the 3BNC terminals for
component signals.
SCART1: Use the 4BNC terminals for RGB with
composite sync. See page 5.
SCART2: Use the 3BNC terminals for RGB and the
VIDEO1 terminal for composite sync. See page 5.

Setting the PC1 connector

Select one of the signals being transmitted to the PC1
terminal.
Example: Set the D-SUB INPUT mode to "SCART3"
On "D-SUB INPUT" of "SET UP" menu, select "SCART3".
SET UP
LANGUAGE
BNC INPUT
D-SUB INPUT
HD SELECT
RGB SELECT
HDMI SET UP
COLOR SYSTEM
BACK GROUND
SIDE MASK
S1/S2
DISPLAY OSD
OSD ADJUST
ALL RESET
SEL. ADJ.
Information
D-SUB INPUT Settings
RGB: Use the D-SUB terminal for RGB signals.
SCART3: Use the D-SUB terminal for RGB signal fed
from SCART. See page 5.
: ENGLISH
: RGB
: RGB
: 1080I
: AUTO
: COLOR1
: AUTO
: GRAY
: 3
: OFF
: ON
: TOP LEFT
: OFF
EXIT RETURN
: ENGLISH
: COMPONENT
: SCART3
: 1080I
: AUTO
: COLOR1
: AUTO
: GRAY
: 3
: OFF
: ON
: TOP LEFT
: OFF
EXIT RETURN
Setting high definition images to the suitable
screen size
Use this procedure to set whether the number of vertical
lines of the input high definition image is 1080I or 1035I
or 540P.
Example: Setting the "HD SELECT" mode to "1035I"
On "HD SELECT" of "SET UP" menu, select "1035I".
SET UP
LANGUAGE
BNC INPUT
D-SUB INPUT
HD SELECT
RGB SELECT
HDMI SET UP
COLOR SYSTEM
BACK GROUND
SIDE MASK
S1/S2
DISPLAY OSD
OSD ADJUST
ALL RESET
SEL. ADJ.
Information
HD SELECT modes
These 3 modes are not displayed in correct image
automatically.
1080I: Standard digital broadcasts
1035I: Japanese "High Vision" signal format
540P: Special Digital broadcasts (for example :
DTC100)
Setting a computer image to the correct RGB
select screen
With the computer image, select the RGB Select mode
for a moving image such as (video) mode, wide mode or
digital broadcast.
Example: Setting the "RGB SELECT" mode to
"MOTION "
On "RGB SELECT" of "SET UP" menu, select "MOTION".
SET UP
LANGUAGE
BNC INPUT
D-SUB INPUT
HD SELECT
RGB SELECT
HDMI SET UP
COLOR SYSTEM
BACK GROUND
SIDE MASK
S1/S2
DISPLAY OSD
OSD ADJUST
ALL RESET
SEL. ADJ.
: ENGLISH
: COMPONENT
: RGB
: 1035I
: AUTO
: COLOR1
: AUTO
: GRAY
: 3
: OFF
: ON
: TOP LEFT
: OFF
EXIT RETURN
: ENGLISH
: COMPONENT
: RGB
: 1080I
: MOTION
1024 768
: AUTO
: GRAY
: 3
: OFF
: ON
: TOP LEFT
: OFF
EXIT RETURN
19
En