Seite 1
Discover the benefits of registering your product online at www.pioneer.co.uk (or www.pioneer-eur.com). Découvrez les nombreux avantages offerts en enregistrant votre produit en ligne maintenant sur www.pioneer.fr (ou www.pioneer-eur.com). Bitte nutzen Sie die Möglichkeit zur Registrierung Ihres Produktes unter www.pioneer.de (oder www.pioneer-eur.com) Operating Instructions Mode d’emploi...
Seite 2
All manuals and user guides at all-guides.com Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. The cut-off plug should be disposed of and must not be The wire which is coloured brown must be connected to IMPORTANT inserted into any 13 amp socket as this can result in...
All manuals and user guides at all-guides.com The following symbols are found on labels WARNING attached to the product. They alert the operators This equipment is not waterproof. To prevent a fire or and service personnel of this equipment to any shock hazard, do not place any container filed with liquid potentially dangerous conditions.
Contents Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
Seite 5
All manuals and user guides at all-guides.com Contents 12 Enjoying through External Equipment Using Software Update ......38 Watching a decoder image ..... 50 Using Auto Update ......38 Connecting a decoder ......50 Setting Update Time ......38 Displaying a decoder image ....50 Starting Manual Update ......
To achieve images of exceptional quality, this must install the unit. PIONEER will not be held responsible for Pioneer Plasma Display System incorporates state-of-the-art accident or damage caused by the use of parts and design and construction, as well as very precise and highly accessories manufactured by other companies.
Seite 7
Do not attach such items as labels and tape to the CAUTION product. PIONEER bears no responsibility for any damage arising from • This may result in the discolouration or scratch of the incorrect use of the product by you or other people, cabinet.
Seite 8
All manuals and user guides at all-guides.com Important User Guidance Information CAUTION Panel sticking and after-image lag • Displaying the same images such as still images for a long time may cause after-image lagging. This may occur in the following two cases. 1 After-image lagging due to remaining electrical load When image patterns with very high peak luminance are displayed for more than 1 minute, after-image lagging may...
24. The Plasma Display weighs about 31.8 kg (70.1 lbs.) for the manufacturer’s instructions are followed. PDP-436SXE. Because it has small depth and is unstable, 11. Power source — This product must operate on a power unpack, carry, and install the product with one more source specified on the specification label.
NOTE • It is strongly recommended to use the optional PIONEER mounting products. • PIONEER shall not be liable for any personal injury or product damage that results from the use of mounting items other than the optional PIONEER products.
All manuals and user guides at all-guides.com Supplied Accessories Supplied Accessories Power cord (2 m) (For Europe, except UK (For UK and Eire) and Eire) Cleaning cloth Only the power cord that is appropriate in your country or region is supplied. Cable tie Warranty card Ferrite core...
All manuals and user guides at all-guides.com Part Names Part Names Plasma Display Front view Press this section (PUSH-OPEN) gently to open the door. POWER button 8 INPUT button SLEEP indicator 9 CHANNEL +/– buttons POWER ON indicator INPUT 4 terminals STANDBY/ON button 10 VOLUME +/–...
All manuals and user guides at all-guides.com Part Names Remote control unit Turns on the power to the Plasma Display or places it into the standby mode. 2 INPUT Selects an input source of the Plasma Display. (INPUT 1, INPUT 2, INPUT 3, INPUT 4) 3 0 –...
The screws, hooks, chains and other fittings that you use to secure the Plasma Display to prevent it from overturning will Using the optional PIONEER stand vary according to the composition and thickness of the surface For details on installation, refer to the instruction manual to which it will be attached.
All manuals and user guides at all-guides.com Preparation Using a wall for stabilization Basic connections 1. Attach falling prevention bolts (hooks) to the Plasma Display. Connecting the power cord 2. Use strong cords or chains to stabilize it Plasma Display (rear view) appropriately and firmly to a wall, pillar, or other sturdy element.
All manuals and user guides at all-guides.com Preparation Connecting to an antenna To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. • For viewing both analogue and digital broadcasts, connect the antenna cable to the ANT OUT terminal (antenna through out) and ANT (analogue input) terminal.
All manuals and user guides at all-guides.com Preparation Preparing the remote control unit Inserting batteries Allowed operation range of the remote control unit Open the battery cover. Operate the remote control unit while pointing it toward the remote control sensor (t) located at the bottom right of the front panel of the Plasma Display.
All manuals and user guides at all-guides.com Watching TV Watching TV Plasma Display Unless you set up TV channels that you can watch under the current conditions, you cannot tune in those channels. For the procedure, see “Setting up TV channels automatically” on page Turning on/ off the power To turn on the system, press POWER on the Plasma Display.
All manuals and user guides at all-guides.com Watching TV (front view) Changing channels Switching between the TV and DTV modes • Press INPUT on the Plasma Display or TV/DTV on the remote control unit to select the DTV or TV input mode. Using P +/P –...
All manuals and user guides at all-guides.com Watching TV Tuning to your favourite (analogue) Changing the volume and sound channels – If you have registered your favourite (analogue) channels, Using i +/i on the remote control unit selecting from the registered list may be the easiest way to •...
Seite 21
All manuals and user guides at all-guides.com Watching TV Using on the remote control unit Each time you press g, MTS toggles as shown below. mode mode MONO mode MONO Setting MONO Stereo NICAM STEREO NICAM STEREO MONO 10:00 10:00 10:00 NICAM Bilingual...
All manuals and user guides at all-guides.com Watching TV Freezing images Use the following procedure to capture and freeze one frame from a moving image that you are watching. Press d. • A still image appears on the right screen while a moving image is shown on the left screen.
All manuals and user guides at all-guides.com Menu Setup Menu Setup Menu operations Using the menu The following describes the typical procedure for setting up the Home Menu Item Page menus. For the actual procedures, see the appropriate pages that describe individual functions. Picture AV Selection Contrast...
All manuals and user guides at all-guides.com Basic Adjustment Settings Basic Adjustment Settings Setting up TV channels automatically Setting up analogue TV channels This section describes how to automatically search for and set manually up TV channels. This section describes how to set up analogue TV channels manually.
All manuals and user guides at all-guides.com Basic Adjustment Settings Select “System” ( / ). Select “On” or “Off” ( / ). Select a sound system ( / ). Store • You can select from among “B/G”, “D/K”, “I”, “L”, and Tuner NR “L’”.
All manuals and user guides at all-guides.com Basic Adjustment Settings Labelling TV channels Sorting preset TV channels You can name TV channels that you have set up, using up to Use the following procedure to change the sequence of the five characters.
All manuals and user guides at all-guides.com Basic Adjustment Settings Language setting AV Selection You can select the language to be used for on-screen display Select from the five viewing options, depending on the current such as menus and instructions, from among 14 languages; environment (e.g., room brightness), the type of the current TV English, German, French, Italian, Spanish, Dutch, Swedish, programme, or the type of images input from external...
All manuals and user guides at all-guides.com Basic Adjustment Settings Basic picture adjustments Advanced picture adjustments Adjust the picture to your preference for the chosen AV The Plasma Display System provides various advanced Selection option (except DYNAMIC). functions for optimising the picture quality. For details on these functions, see the tables.
All manuals and user guides at all-guides.com Basic Adjustment Settings then ENTER). Select the desired parameter ( / Using Colour Temp Press HOME MENU. Provides images with clearer colour contours. The CTI stands for Colour then ENTER). Select “Picture” ( / Transient Improvement.
All manuals and user guides at all-guides.com Basic Adjustment Settings Eliminating noise from images Performs such compensation that results in the optimum contrast Press HOME MENU. characteristics for images. then ENTER). Select “Picture” ( / Selections Deactivates the ACL. then ENTER). Select “Pro Adjust”...
All manuals and user guides at all-guides.com Basic Adjustment Settings Item Description Sound adjustments Deactivates the FOCUS. You can adjust the sound quality to your preference with the (factory default) following settings. Activates the FOCUS. Adjust the sound to your preference for the chosen AV Selection option.
All manuals and user guides at all-guides.com Basic Adjustment Settings No Operation off Power Control The system will be automatically placed into the standby mode Power Control provides convenient functions for power saving. when no operation is performed for three hours. Press HOME MENU.
All manuals and user guides at all-guides.com Enjoying DTV broadcasts Enjoying DTV broadcasts Viewing a channel banner Watching DTV programmes A channel banner shows programme names, start/end time of Digital TV (DTV) not only replaces the conventional analogue TV programmes and other channel information. channels, but also provides more channels, clearer picture quality, and various types of useful information.
All manuals and user guides at all-guides.com Enjoying DTV broadcasts then ENTER). Select “Replace Existing Channels” ( / Reconfiguring the DTV channel settings • The system first erases all channel information and then This section describes how to reconfigure the DTV channel starts channel search.
All manuals and user guides at all-guides.com Enjoying DTV broadcasts Select “On” or “Off” ( / ). Add New Channels Installation Search Information Found Channels Existing Channels ************ Aerial Power Channels Found ************ Country Germany Progress ****** Add New Channels ************ Replace Existing Channels Signal Check...
All manuals and user guides at all-guides.com Enjoying DTV broadcasts Activating the Favourites function Customizing channel related settings Make sure to activate this function after favourite channels are This section describes how to customize various channel registered. related settings. These settings include favourite channel registration, Channel Skip, and Channel Lock.
All manuals and user guides at all-guides.com Enjoying DTV broadcasts Setting the Child Lock Selecting a digital audio format With this function, parents can prevent their children from Use the following procedure to switch between the PCM and watching age-restricted TV programmes. This function Dolby digital audio format.
All manuals and user guides at all-guides.com Enjoying DTV broadcasts NOTE Selecting languages for audio, subtitles, • We recommend that you normally select “On”. and teletext • For Auto Update to start, there must be more than 1 hour left You may manually configure language settings for audio, to the start of the next preset recording/watching.
• CA modules and smart cards are neither supplied nor Some stations bring you programmes with the MHEG optional accessories from PIONEER. (Multimedia and Hypermedia Expert Group) application After inserting a card, leave it in the slot permanently. Do not encoded, letting you experience DTV interactively.
All manuals and user guides at all-guides.com Using the Electronic Programme Guide (EPG)(for DTV only) Using the Electronic Programme Guide (EPG)(for DTV only) Programme information EPG display format The Electronic Programme Guide (EPG) shows the table of scheduled digital TV programmes and detailed information about individual programmes.
All manuals and user guides at all-guides.com Using the Electronic Programme Guide (EPG)(for DTV only) To view more information (not currently displayed) about Using the EPG the selected programme, press p. Use the following procedure to check the schedule of digital TV •...
All manuals and user guides at all-guides.com Using the Electronic Programme Guide (EPG)(for DTV only) • The Programme Timer screen with a list of other preset Presetting TV programmes using the programmes information appears. Programme Timer Wed.24.Nov 12:34 Using the EPG, you can easily preset digital TV programmes for Date Time Channel...
All manuals and user guides at all-guides.com Using the Electronic Programme Guide (EPG)(for DTV only) NOTE Setting the timer manually Using the menu, you can also preset digital TV programmes by • Preset recording/watching begins immediately when specifying their scheduled date and time. presetting operations are performed within three minutes of the start of the programme.
All manuals and user guides at all-guides.com Using the Electronic Programme Guide (EPG)(for DTV only) Using the menu Changing/cancelling TV programme presettings Use the following procedure to change or cancel programme presettings using the menu. Using the EPG Press HOME MENU. Use the following procedure to change or cancel programme then ENTER).
All manuals and user guides at all-guides.com Using the Electronic Programme Guide (EPG)(for DTV only) EPG Search Using other useful EPG functions Press YELLOW when the EPG screen (Programme List, Below are some useful functions that guide you through the EPG screen and save your time.
All manuals and user guides at all-guides.com Useful Adjustment Settings Useful Adjustment Settings Before starting the menu, press INPUT 1, INPUT 2, or INPUT Switching the vertical drive frequency 3 on the remote control unit or press INPUT on the Plasma Display to select an input source.
All manuals and user guides at all-guides.com Useful Adjustment Settings Selecting a screen size manually Selecting a screen size automatically Press f to switch among the screen size options selectable The Plasma Display automatically selects an appropriate for the type of video signals currently received. screen size when the received video signals contain WSS (wide screen signaling) information or when video signals are •...
All manuals and user guides at all-guides.com Useful Adjustment Settings Changing the brightness at both sides Sleep Timer of the screen (Side Mask) When the selected time elapses, the Sleep Timer automatically places the system into the standby mode. With the 4:3, FULL 14:9, or CINEMA 14:9 screen size, you can change the brightness of the grey side masks that appear at Press HOME MENU.
(1234) is restored. We suggest you write down your password so you don’t forget it. If you forget the password PDP-436SXE When the message “Please Input Your Password” is displayed in the above procedure, press the ENTER Your password No.:...
All manuals and user guides at all-guides.com Enjoying through External Equipment Enjoying through External Equipment You can connect many types of external equipment to your Watching a VCR image Plasma Display System, like a decoder, VCR, DVD player, personal computer, game console, and camcorder. To view images coming from external equipment, select the Connecting a VCR input source using the INPUT buttons on the remote control...
All manuals and user guides at all-guides.com Enjoying through External Equipment Item Description Using HDMI Input Disable Deactivates the HDMI terminal. The INPUT 3 terminals include HDMI terminals to which digital (factory default) video and audio signals can be input. To use the HDMI terminal, activate the terminal and specify the types of video Enable Activates the HDMI terminal.
All manuals and user guides at all-guides.com Enjoying through External Equipment (rear view) Using i/o Link.A The Plasma Display System incorporates three typical i/o Link.A functions for smooth connections between Plasma Display and other audiovisual equipment. One Touch Play COMPONENT INPUT 3 VIDEO While the Plasma Display System is in standby mode, it...
All manuals and user guides at all-guides.com Enjoying through External Equipment Enjoying a game console or watching Enjoying through audio equipment in camcorder images connection Connecting a game console or camcorder Connecting audio equipment Use the INPUT 4 terminals to connect a game console, You can enjoy more powerful sound by connecting such audio camcorder and other audiovisual equipment.
DVD recorder display. (DVR) is in connection. Press HOME MENU. The following diagram assumes that you connect a Pioneer DVR-920H/DVR-930H to the Plasma Display so that you can then ENTER). Select “Setup” ( / enjoy timeshift playback with the recorder.
All manuals and user guides at all-guides.com Using the Teletext Functions Using the Teletext Functions What is Teletext? Operating the Teletext basics Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your Plasma Display System Turning on and off Teletext receives Teletext signals broadcast by TV networks, and decodes them into graphical format for viewing.
All manuals and user guides at all-guides.com Using the Teletext Functions Displaying subpages Displaying subtitle pages You can display several subpages as they are transmitted. You can display several subtitles as they are transmitted. Press [ to display the subtitle. Subpage screen •...
All manuals and user guides at all-guides.com Appendix Appendix Troubleshooting Problem Possible Solution • No power. • Is the power cord disconnected? (See page 15.) • The system cannot be switched on. • Has the main power been turned on? (See page 18.) •...
All manuals and user guides at all-guides.com Appendix Connecting pin assignments for SCART Various audio and video devices may be connected via the SCART terminals. 1 3 5 7 9 111315171921 2 4 6 8 101214161820 SCART (INPUT 1) 1. Audio right output 8.
All manuals and user guides at all-guides.com Appendix Specifications Item 43" Plasma Display, Model: PDP-436SXE Number of Pixels 1024 x 768 pixels 13 W + 13 W (1 kHz, 10 %, 8 q) Audio Amplifier Speakers Bass-reflex type (two-way system)
Seite 60
All manuals and user guides at all-guides.com...
Seite 61
All manuals and user guides at all-guides.com AVERTISSEMENT AVERTISSEMENT Cet appareil n’est pas étanche. Pour éviter les risques d’incendie et Pour éviter les risques d’incendie, ne placez aucune flamme de décharge électrique, ne placez près de lui un récipient rempli nue (telle qu’une bougie allumée) sur l’appareil.
Seite 62
Table des matières Table des matières Nous vous remercions d’avoir acquis cet appareil Pioneer. Veuillez lire attentivement ce mode d’emploi pour être en mesure d’utiliser l’appareil convenablement. La lecture de ce mode d’emploi terminée, conservez-le dans un endroit sûr pour référence.
Seite 63
All manuals and user guides at all-guides.com Table des matières Utilisation de l’application MHEG (Royaume- Affichage des images provenant d’un Uni uniquement) ........39 décodeur ............ 50 Économiseur d’écran ........39 Affichage des images d’un magnétoscope .. 50 Interface commune .........39 Raccordement d’un magnétoscope ..50 Insertion d’une carte CA ......39 Affichage des images provenant d’un magnétoscope ...........
Pour éviter toute anomalie et toute surchauffe, veillez à ce que Avec le temps, la luminosité de l’écran à plasma Pioneer PDP- les ouïes de l’appareil ne soient pas obstruées de manière que 436SXE diminuera légèrement, tout comme dans le cas des...
Seite 65
Voir ci-après les informations concernant les pixels des écrans de la condensation se forme, ne mettez pas l’appareil en à plasma. Les écrans à plasma Pioneer contiennent un très service et attendez qu’elle ait disparu. Mettre l’appareil en grand nombre de pixels. (Cela dépend de la taille de l’écran ;...
Seite 66
All manuals and user guides at all-guides.com Informations importantes pour l’utilisateur DANGER Rémanence d’image sur le panneau • L’affichage de la même image pendant une longue période peut provoquer une rémanence de cette image. Cela peut spécialement se produire dans les circonstances suivantes. 1 Image rémanente due à...
All manuals and user guides at all-guides.com Précautions de sécurité Précautions de sécurité L’électricité permet de disposer d’un grand nombre de objet lourd. Examinez soigneusement le cheminement du fonctions utiles mais elle peut être la source de blessures et de câble d’alimentation près de la prise secteur et au point de dommages matériels si certaines précautions ne sont pas sortie de l’appareil.
• Nous ne saurions trop vous conseiller d’utiliser les accessoires PIONEER de fixation. • PIONEER ne saurait être tenue responsable des blessures ou dommages matériels qui résulteraient de l’utilisation d’accessoires de fixation autres que ceux conçus et fabriqués par PIONEER.
All manuals and user guides at all-guides.com Accessoires fournis Accessoires fournis Cordon d’alimentation (2 m) (Pour l’Europe à l’exception de (Pour l’Eire et le Royaume-Uni) l’Eire et du Royaume-Uni) Chiffon de nettoyage Seul le cordon d’alimentation convenant pour le pays ou la région de distribution, est fourni.
All manuals and user guides at all-guides.com Nomenclature Nomenclature Écran plasma Vue de face Appuyez doucement sur cette section (PUSH-OPEN) pour ouvrir la porte. Touche POWER Touche INPUT Témoin SLEEP Touches CHANNEL +/– Témoin POWER ON Prises INPUT 4 Touche STANDBY/ON 10 Touches VOLUME +/–...
All manuals and user guides at all-guides.com Nomenclature Boîtier de télécommande En mode téléviseur/entrée extérieure: Cette touche affiche les informations sur le canal. En mode d’entrée DTV: Elle affiche les informations sur la bannière. P +/P – TV/DTV En mode téléviseur/entrée extérieure: elles sélectionnent un canal.
Si vous ne prenez pas ces précautions, l’écran à plasma risque Utilisation du support PIONEER en option de tomber ou de se renverser et de causer des blessures. Pour les détails concernant l’installation, reportez-vous au Les vis, crochets, chaînes et autres ferrures que vous utilisez...
All manuals and user guides at all-guides.com Préparation Fixation à un mur Raccordements de base 1. Fixez des boulons (crochets) de sécurité à l’écran à plasma. Raccordement du cordon d’alimentation 2. Utilisez de robustes câbles ou chaînes pour Écran plasma (vue de dos) le fixer correctement et solidement à...
All manuals and user guides at all-guides.com Préparation Raccordement à l’antenne Pour bénéficier d’une image de meilleure qualité, utilisez une antenne extérieure. Voici de brèves explications sur le raccordement d’un câble coaxial. • Pour regarder à la fois des émissions analogues et numériques, raccordez le câble d’antenne à...
All manuals and user guides at all-guides.com Préparation Préparation du boîtier de télécommande Mise en place des piles Portée du boîtier de télécommande Agissez sur le boîtier de télécommande en le dirigeant vers le Ouvrez le couvercle du logement des piles. capteur (t) qui est placé...
All manuals and user guides at all-guides.com Pour regarder la télévision Pour regarder la télévision Écran plasma Vous ne pouvez effectuer la syntonisation sur un canal que si vous avez préalablement réglé le téléviseur sur ce canal. La manière de procéder pour cela est donnée au paragraphe “Réglage automatique des canaux de télévision”, page 24.
All manuals and user guides at all-guides.com Pour regarder la télévision (vue de face) Sélection des canaux Commutation entre les modes télévision (TV) et télévision numérique (DTV) Pour sélectionner le mode entrée de télévision numérique (DTV) ou de télévision (TV), appuyez sur INPUT de l’écran plasma ou sur TV/DTV du boîtier de télécommande.
All manuals and user guides at all-guides.com Pour regarder la télévision Accord sur vos canaux (analogiques) Modification du niveau sonore favoris – Utilisation des touches i +/i du boîtier de Si vous avez enregistré vos canaux (analogiques) favoris, la télécommande sélection à...
All manuals and user guides at all-guides.com Pour regarder la télévision Utilisation de la touche du boîtier Chaque pression sur la touche g, provoque l’adoption d’un type de de télécommande sons donné. Mode Mode Mode MONO MONO REMARQUE • Une indication est affichée sur l’écran correspondant à chaque mode sonore multiplex sélectionné au moyen de la touche g, et cela en fonction du signal télévisé...
All manuals and user guides at all-guides.com Pour regarder la télévision Gel d’une image Utilisez la méthode suivante pour saisir et geler une image parmi les images animées que vous regardez. Appuyez sur d. • Une image fixe apparaît sur la partie droite de l’écran tandis qu’une image animée occupe la partie gauche.
All manuals and user guides at all-guides.com Configuration du menu Configuration du menu Opérations du menu Utilisation du menu Voici une présentation des procédures types pour le réglage Home Menu Paramètre Page des menus. Pour connaître chaque procédure, reportez-vous aux pages appropriées décrivant individuellement ces Image Sélection AV fonctions.
All manuals and user guides at all-guides.com Réglages de base Réglages de base • La page de saisie du mot de passe s’affiche. Tapez un Réglage automatique des canaux de mot de passe à 4 chiffres en vous servant des touches 0 à...
All manuals and user guides at all-guides.com Réglages de base Sélectionnez “Système” ( / ). Sélectionnez “Marche” ou “Arrêt” ( / ). Sélectionnez un système sonore ( / ). Mémoriser • Vous pouvez choisir parmi les systèmes suivants “B/G”, Marche Syntoniseur RB “D/K”, “I”, “L”...
All manuals and user guides at all-guides.com Réglages de base Étiquetage des canaux de télévision Classement des canaux de télévision préréglés Vous avez la possibilité d’attribuer un nom ne comportant pas Utilisez la méthode suivante pour classer les canaux de plus de 5 caractères à...
All manuals and user guides at all-guides.com Réglages de base Appuyez sur HOME MENU pour quitter le menu. Sélection AV Vous avez le choix entre 5 options de visionnement, en fonction REMARQUE de l’environnement actuel (ex. luminosité de la pièce), le type •...
All manuals and user guides at all-guides.com Réglages de base Réglages de base de l’image Réglages avancés de l’image Réglez l’image selon vos préférences et en fonction de l’option Le système d’écran à plasma est doté de diverses fonctions Sélection AV (sauf DYNAMIQUE) retenue. avancées permettant d’optimiser la qualité...
All manuals and user guides at all-guides.com Réglages de base Utilisation de Temp. Couleur Cette fonction permet d’obtenir des couleurs aux contours mieux définis. Appuyez sur HOME MENU. CTI signifie Amélioration des transitions de couleurs. puis ENTER). Sélectionnez “Image” ( / Sélections Arrêt CTI n’est pas actif.
All manuals and user guides at all-guides.com Réglages de base Elimination du bruit des images Effectue une correction qui donne lieu à des caractéristiques de contraste Appuyez sur HOME MENU. optimales pour les images. puis ENTER). Sélectionnez “Image” ( / Sélections Arrêt ACL désactivé...
All manuals and user guides at all-guides.com Réglages de base Paramètre Description Réglages du son Arrêt FOCUS n’est pas actif. Grâce aux paramètres qui suivent, vous pouvez régler les (valeur par défaut) caractéristiques des sons selon vos préférences. Marche FOCUS est actif. Réglez le son selon vos préférences et en fonction de l’option Sélection AV retenue.
All manuals and user guides at all-guides.com Réglages de base Mise hors service en l’absence d’opération Commande alimentation Ce paramètre place le système en veille si aucune opération La gestion de l’alimentation offre différents moyens n’est exécutée pendant 3 heures. d’économiser l’énergie.
All manuals and user guides at all-guides.com Savourer les émissions DTV Savourer les émissions DTV Affichage d'une bannière de canal Regarder des programmes DTV Une bannière de canal indique les noms d'émissions, l'heure La télévision numérique (DTV) ne remplace pas seulement les de début/fin des émissions et d'autres informations.
All manuals and user guides at all-guides.com Savourer les émissions DTV Sélectionnez “Remplacer les chaînes existantes” ( / Reconfiguration des réglages des puis ENTER). canaux de télévision numérique • Le système commence par effacer toutes les Cette partie décrit comment reconfigurer les réglages des informations relatives aux canaux puis démarre la canaux de télévision numérique après les avoir faits avec recherche.
All manuals and user guides at all-guides.com Savourer les émissions DTV Sélectionnez “Marche” ou “Arrêt” ( / ). Ajouter des chaînes Installation Recherche d’infomations Trouvé canaux Canaux existants ************ Alimentation Antenne Arrêt Trouvés canaux ************ Pays Allemagne Recherche en cours... ****** Ajouter des chaînes ************...
All manuals and user guides at all-guides.com Savourer les émissions DTV Activation de la fonction Favoris Personnalisation des réglages relatifs Veillez à activer cette fonction une fois que des canaux favoris aux canaux sont enregistrés. Cette partie décrit comment personnaliser les divers réglages Répétez les opérations 1 à...
All manuals and user guides at all-guides.com Savourer les émissions DTV REMARQUE Réglage de Verrouillage enfants Avec cette fonction, les parents peuvent empêcher leurs • Pour changer de page sur l’écran Tri à l’opération 4, enfants de regarder les émissions de télévision sujettes à des sélectionnez sur l’écran avec / / /...
All manuals and user guides at all-guides.com Savourer les émissions DTV • 60 secondes avant la mise à jour prévue, une invite apparaît Sélection des langues pour les parties vous demandant si vous souhaitez procéder ou non à la mise à...
• Les modules CA et les cartes intelligentes ne sont ni Certaines stations vous apportent des programmes avec fournies; ni des accessoires en option de PIONEER. l’application MHEG (Multimedia and Hypermedia Expert Après avoir inséré une carte, laissez-la en permanence dans la Group) cryptée, vous permettant de vivre une expérience DTV...
All manuals and user guides at all-guides.com Utilisation du guide électronique de programme (EPG) (pour DTV uniquement) Utilisation du guide électronique de programme (EPG) (pour DTV uniquement) Information de programmes Format d’affichage EPG Le guide électronique de programme (EPG) affiche le tableau des programmes de télévision numérique prévus et des informations détaillées sur chaque programme.
All manuals and user guides at all-guides.com Utilisation du guide électronique de programme (EPG) (pour DTV uniquement) Pour consulter davantage d’informations (autres que Utilisation de EPG celles actuellement affichées) sur le programme Procédez comme suit pour vérifier le planning des sélectionné, appuyez sur p.
All manuals and user guides at all-guides.com Utilisation du guide électronique de programme (EPG) (pour DTV uniquement) • L’écran de la minuterie du programme avec une liste Préréglage des programmes de des informations des autres programmes préréglés apparaît. télévision avec EPG Avec EPG, vous pouvez facilement prérégler des programmes Programmation des chaînes MER.24.nov 12:34...
All manuals and user guides at all-guides.com Utilisation du guide électronique de programme (EPG) (pour DTV uniquement) REMARQUE Réglage manuel de la minuterie À l’aide du menu, vous pouvez également prérégler des • L’enregistrement/visionnement préréglé commence programmes de télévision numérique en spécifiant la date et immédiatement lorsque les opérations de préréglage sont l’heure prévues.
All manuals and user guides at all-guides.com Utilisation du guide électronique de programme (EPG) (pour DTV uniquement) Sélectionnez un numéro de programme à modifier ( / ). Modification/annulation des préréglages des • Supprimer le préréglage du programme (ROUGE). programmes TV •...
All manuals and user guides at all-guides.com Utilisation du guide électronique de programme (EPG) (pour DTV uniquement) Recherche EPG Utilisation d’autres fonctions EPG Appuyez sur JAUNE lorsque l’écran EPG (Liste de pratiques programme, informations détaillées et résultat de la Vous trouverez ci-dessous certaines fonctions pratiques qui recherche) est affiché.
All manuals and user guides at all-guides.com Réglages utiles Réglages utiles Avant de démarrer le menu, appuyez INPUT 1, INPUT 2 ou Sélection de la fréquence de balayage INPUT 3 du boîtier de télécommande, ou sur INPUT de l’écran plasma de manière à sélectionner une source d’entrée. vertical Appuyez sur HOME MENU.
All manuals and user guides at all-guides.com Réglages utiles Sélection manuelle d’un format d’écran Sélection automatique d’un format d’écran Appuyez sur f pour passer d’un format d’écran disponible, compte tenu de la nature des signaux vidéo reçus, à l’autre. L’écran à plasma sélectionne automatiquement un format approprié...
All manuals and user guides at all-guides.com Réglages utiles Modification de la luminosité de chaque Minuterie de mise en veille côté de l’écran (Cache latéral) À l’expiration d’un certain temps, le système est automatiquement mis en veille par cette minuterie. Avec le format d’écran 4:3, PLEIN 14:9 ou CINÉMA 14:9 sélectionné...
(1234) est rétabli. Nous vous proposons d’écrire ici le mot de passe. Si vous oubliez le mot de passe PDP-436SXE Quand le message “Intro votre code svp” est affiché lors des opérations ci-dessus, tenez la touche ENTER du Mot de passe: boîtier de télécommande enfoncée pendant au moins 3...
All manuals and user guides at all-guides.com Emploi d’un appareil extérieur Emploi d’un appareil extérieur Vous avez la possibilité de relier divers types d’appareil au Affichage des images d’un magnétoscope système d’écran plasma, par exemple un décodeur, un magnétoscope, un lecteur de DVD, un ordinateur personnel, une console de jeu ou un caméscope.
All manuals and user guides at all-guides.com Emploi d’un appareil extérieur Paramètre Description Utilisation de l’entrée HDMI Désactiver La prise HDMI n’est pas active. Les prises INPUT 3 assurent les liaisons HDMI et peuvent recevoir (valeur par défaut) des signaux d’entrée audio et vidéo. Pour utiliser la prise HDMI, mettez cette prise en service et précisez le type des signaux audio Activer La prise HDMI est active.
All manuals and user guides at all-guides.com Emploi d’un appareil extérieur (vue de dos) Utilisation de l’entrée/sortie link.A Le système d’écran plasma comporte trois fonctions typiques d’entrée/sortie Link.A facilitant les connexions entre l’écran plasma et d’autres appareils audiovisuels. Lecture commandée par touche unique COMPONENT INPUT 3 Le système d’écran plasma étant en veille, il se met...
All manuals and user guides at all-guides.com Emploi d’un appareil extérieur Utilisation d’une console de jeu et Utilisation des appareils audio reliés visionnement des images d’un caméscope Raccordement d’un appareil audio Vous pouvez bénéficier de sonorités plus puissantes si vous reliez les appareils audio qui conviennent, par exemple un Raccordement d’une console de jeu ou d’un récepteur audiovisuel.
(DVR) est connecté. Commutation de la sortie péritel L'illustration suivante représente le raccordement d'un appareil Pioneer DVR-920H/DVR-930H au Écran plasma de Les signaux vidéo et audio sortis par les sources ENTRÉE2 et manière à pouvoir utiliser la lecture en différé avec ENTRÉE3 sont les mêmes que ceux utilisés pour l'affichage...
All manuals and user guides at all-guides.com Utilisation des fonctions télétexte Utilisation des fonctions télétexte Qu’est-ce que le télétexte ? Utilisation de base du télétexte Le télétexte consiste à diffuser des pages d’information et de divertissement qui peuvent être affichées sur les téléviseurs Mise en service, ou hors service, du télétexte spécialement conçus pour cela.
All manuals and user guides at all-guides.com Utilisation des fonctions télétexte Affichage d’une page secondaire Affichage des pages de sous-titres Vous pouvez afficher les pages secondaires au fur et à mesure Vous pouvez afficher plusieurs sous-titres à mesure qu’ils sont de leur transmission.
All manuals and user guides at all-guides.com Annexe Annexe Guide de dépannage Anomalie Action corrective possible • Absence d’alimentation. • La fiche du cordon d’alimentation est-elle débranchée? (Reportez-vous à la page 15.) • Le système ne peut pas être mis sous •...
All manuals and user guides at all-guides.com Annexe Bornage de la prise péritel Divers appareils audio et vidéo peuvent être interconnectés grâce aux prises péritel. 1 3 5 7 9 111315171921 2 4 6 8 101214161820 Prise péritel (INPUT 1) 1.
All manuals and user guides at all-guides.com Annexe Caractéristiques techniques Paramètre Écran à plasma 43 po., modèle: PDP-436SXE 1024 × 768 pixels Nombre de pixels 13 W + 13 W (1 kHz, 10 %, 8 Ω) Amplificateur audio Enceintes Type Bass reflex (système à 2 voies) Systèmes d'ambiance...
Seite 118
All manuals and user guides at all-guides.com...
Seite 119
All manuals and user guides at all-guides.com WARNUNG WARNUNG Dieses Gerät ist nicht wasserdicht. Zur Vermeidung der Keine Quellen offener Flammen (z.B. eine brennende Kerze) Gefahr von Brand und Stromschlag keine Behälter mit auf dieses Gerät stellen. Flüssigkeiten (z.B. Blumenvasen und-töpfe) in die Nähe des D3-4-2-1-7a_A_Ge Gerätes bringen und dieses vor Tropfwasser, Spritzwasser, Regen und Nässe schützen.
Seite 120
All manuals and user guides at all-guides.com Inhalt Inhalt Vielen Dank, dass Sie sich für dieses Pioneer-Produkt entschieden haben. Lesen Sie diese Bedienungsanleitung bitte aufmerksam durch, sodass Sie mit der richtigen Bedienungsweise Ihres Modells vertraut werden. Nachdem Sie die Bedienungsanleitung gelesen haben, sollten Sie sie an einer sicheren Stelle griffbereit aufbewahren.
Seite 121
All manuals and user guides at all-guides.com Inhalt Aktivieren von automatischem Ändern der Helligkeit an beiden Überspringen ........36 Bildschirmseiten (Seitenmaske) ..... 48 Einstellen der Kindersicherung ..37 Timer ............48 Gespeicherte DTV-Kanäle sortieren ... 37 Verwendung eines Passworts ....48 Wählen eines Digital-Audioformats ..
Wichtige Grundregeln Wichtige Grundregeln Grundregeln zur Aufstellung Damit Sie das Plasma Display-System Pioneer PureVision PDP-436SXE auch voll genießen können, sollten Sie zunächst Das Pioneer PureVision Plasma Display-System PDP-436SXE diese Informationen aufmerksam lesen. zeichnet sich durch eine sehr flache Bauweise aus. Aus Sicherheitsgründen sollten bei der Montage oder Aufstellung...
Seite 123
Feuchtigkeitsniederschlag kann zu Funktionsstörungen Informationen zu Pixeldefekten führen. Plasma-Schirme zeigen Informationen mithilfe von Pixeln an. Pioneer Plasma Display-Panels enthalten eine sehr große Reinigen der Bildschirmoberfläche und der Anzahl an Pixeln. (Ja nach Panel-Größe: über 2,3 Millionen glänzenden Fläche des vorderen Gehäuses Zellen bei einem 43-Zoll-Display, über 2,9 Millionen Pixel bei...
Seite 124
All manuals and user guides at all-guides.com Wichtige Grundregeln VORSICHT Einbrenner und Nachbilder • Wenn dasselbe Bild, zum Beispiel ein Standbild, über längere Zeit angezeigt wird, können Nachbilder entstehen. Dies kann in den folgenden beiden Fällen auftreten. 1 Nachbild wegen elektrischer Restladung Wenn Bildmuster mit sehr hoher Spitzenluminanz länger als 1 Minute angezeigt werden, können Nachbilder wegen elektrischer Restladung verursacht werden.
Anweisungen des Herstellers nicht entsprochen ist. Verfärbungen und Verzerrungen verursacht werden. 11. Spannungsversorgung—Die verwendete 24. Beim PDP-436SXE wiegt das Plasma Display circa 31,8 kg. Spannungsversorgung muss den Angaben auf dem Da es wegen seiner geringen Bautiefe eine schlechte Typenschild entsprechen. Bitte erkundigen Sie sich bei Stabilität aufweist, ist beim Auspacken, Tragen und...
Seite 126
Fall zur Montage nicht eigens angegebener Produkte. ZUR BEACHTUNG • Es wird mit Nachdruck empfohlen, Original-PIONEER-Montagezubehör zu verwenden. • PIONEER übernimmt keine Verantwortung für Personenverletzungen und Produkteschäden, die sich auf den Gebrauch von anderen Befestigungsteilen als den optionalen PIONEER-Produkten zurückführen lassen.
All manuals and user guides at all-guides.com Mitgeliefertes Zubehör Mitgeliefertes Zubehör Netzkabel (2 m) (Für Europa außer UK (Für UK und Irland) und Irland) Reinigungstuch Nur das für Ihr Land bzw. Gebiet geeignete Netzkabel ist mitgeliefert. Kabelbinder Garantiekarte Ferritkern (Für Ferritkern) Fernbedienung Zwei Mignonzellen (AA) Zwei Bedienungsanleitungen...
All manuals and user guides at all-guides.com Teilebezeichnungen Teilebezeichnungen Plasma Display Vorderseite Zum Öffnen der Blende diesen Bereich (PUSH-OPEN) vorsichtig andrücken. Taste POWER 8 Taste INPUT Anzeige SLEEP 9 Tasten CHANNEL +/– Anzeige POWER ON Anschlüsse INPUT 4 Taste STANDBY/ON 10 Tasten VOLUME +/–...
All manuals and user guides at all-guides.com Teilebezeichnungen Fernbedienung Stellt die Stromversorgung zum Plasma Display her oder schaltet es auf den Bereitschaftsmodus. 2 INPUT Wählt die Eingangsquelle für das Plasma-Display. (Eingang 1, Eingang 2, Eingang 3, Eingang 4) 3 0 – 9 TV/DTV TV/Extern-Eingangsmodus: Wählt einen Kanal.
Wenn derartige Vorkehrungen unterlassen werden, könnte das gewährleistet ist. Plasma Display herunterfallen und Verletzungen verursachen. Gebrauch des optionalen PIONEER Fußes Die Wahl der Sicherungsmittel gegen Umkippen, wie z.B. Schrauben, Haken, Ketten usw., hängt von der Beschaffenheit Näheres zur Montage finden Sie in der dem Fuß beiliegenden und Dicke der Montagefläche ab.
All manuals and user guides at all-guides.com Vorbereitungen Gebrauch einer Wand zur Stabilisierung Basisanschlüsse 1. Bringen Sie die Umfallverhinderungsschrauben (Haken) am Anschließen des Netzkabels Plasma Display an. Plasma Display (Rückseite) 2. Verwenden Sie starke Schnüre oder Ketten, um das Gerät auf geeignete Weise sicher an einer Wand, Säule oder einem anderen festen Bauelement zu stabilisieren.
All manuals and user guides at all-guides.com Vorbereitungen Anschließen einer Antenne Um ein sauberes Bild zu erhalten, empfiehlt sich der Anschluss einer Außenantenne. Nachstehend finden Sie eine kurze Beschreibung der bei Verwendung eines Koaxialkabels vorzunehmenden Anschlüsse. • Zum Wiedergeben von sowohl analogen als auch digitalen Programmen bitte die ANT OUT-Buchse (Durchschleifsignal) über das Antennenkabel mit der ANT -Buchse (Analogeingang) verbinden.
All manuals and user guides at all-guides.com Vorbereitungen Vorbereiten der Fernbedienung Einlegen der Batterien Wirkungsbereich der Fernbedienung Zur Benutzung der Fernbedienung ist diese auf den Öffnen Sie den Batteriefachdeckel. Fernbedienungssensor (t) unten rechts an der Vorderseite des Plasma Displays zu richten. Der Abstand der Fernbedienungseinheit vom Fernbedienungssensor sollte 7 m nicht überschreiten, und ihr Winkel zum Sensor sollte nach rechts, links, oben und unten innerhalb von 30 Grad liegen.
All manuals and user guides at all-guides.com Fernsehempfang Fernsehempfang Plasma Display Empfangbare Fernsehkanäle müssen eingerichtet werden, da sie sonst nicht abgestimmt werden können. Näheres hierzu finden Sie auf Seite 24 unter „Automatisches Programmieren von Fernsehkanälen“. Ein-/Ausschalten Zum Einschalten des Systems drücken Sie POWER am Plasma Display.
All manuals and user guides at all-guides.com Fernsehempfang (Vorderseite) Kanalwechsel Umschalten zwischen TV- und DTV-Modus • Wählen Sie den DTV- oder den TV-Eingangsmodus durch Drücken von INPUT am Plasma-Display oder von TV/DTV an der Fernbedienung. Mit P +/P – an der Fernbedienung •...
All manuals and user guides at all-guides.com Fernsehempfang Abrufen von Favoritenkanälen (analog) Lautstärke-und Toneinstellungen Wenn Sie (analoge) Kanäle als Favoriten gespeichert haben, können Sie diese einfach durch Wahl aus der Favoritenliste – Mit i +/i an der Fernbedienung abrufen. • Drücken Sie i + zum Erhöhen der Lautstärke. ZUR BEACHTUNG –...
Seite 137
All manuals and user guides at all-guides.com Fernsehempfang an der Fernbedienung Mit jedem Druck auf g wird MTS wie unten gezeigt umgeschaltet. Modus Modus Modus MONO MONO Einstellungen MONO Stereo NICAM STEREO NICAM STEREO MONO 10:00 10:00 10:00 NICAM- Zweispra- NICAM p NICAM pp MONO...
All manuals and user guides at all-guides.com Fernsehempfang Standbild Sie können ein Vollbild der momentanen, laufenden Szene einfangen und als Standbild wiedergeben. Gehen Sie hierzu wie nachfolgend beschrieben vor. Drücken Sie d. • Ein Standbild erscheint auf dem rechten Screen, während der linke Screen ein bewegtes Bild zeigt.
All manuals and user guides at all-guides.com Menü-Steuerung Menü-Steuerung Menü-Bedienung Menü-Übersicht Im Nachstehenden ist das typische Vorgehen zur Vornahme Home Menu Gegenstand Seite der Einstellungen in den Menüs beschrieben. Konkrete Anleitungen finden Sie auf den entsprechenden Seiten mit den Bild AV-Wahl Beschreibungen der jeweiligen Funktionen.
All manuals and user guides at all-guides.com Grundeinstellungen Grundeinstellungen Automatisches Programmieren von Manuelles Programmieren von Analog- Fernsehkanälen Fernsehkanälen In diesem Abschnitt wird beschrieben, wie Fernsehkanäle In diesem Abschnitt wird beschrieben, wie Analog- automatisch gesucht und programmiert werden können. Fernsehkanäle manuell programmiert werden können. Verwendung der Autoinstallation Durch manuelle Einstellung Wenn das Plasma Display-System nach dem Kauf zum ersten...
All manuals and user guides at all-guides.com Grundeinstellungen „System“ wählen ( / ). Wählen Sie „Ein“ oder „Aus“ ( / ). Das Tonsystem wählen ( / ). Speichern Nein • Wählen Sie unter „B/G“, „D/K“, „I“, „L“ und „L’“. Tuner-Rauschmind. Manuelle Einstellung Kindersicherung Ansicht...
All manuals and user guides at all-guides.com Grundeinstellungen Eingeben von Fernsehkanalnamen Sortieren programmierter Fernsehkanäle Sie können gespeicherten Fernsehkanälen einen aus bis zu Gehen Sie wie nachfolgend beschrieben vor, um die Reihenfolge programmierter Fernsehkanäle zu ändern. fünf Zeichen bestehenden Namen zuweisen. Dies kann später Drücken Sie HOME MENU.
All manuals and user guides at all-guides.com Grundeinstellungen Einstellen der Sprache AV-Wahl Wählen Sie unter 14 Sprachen für On-Screen-Anzeigen, wie Wählen Sie die Einstellung, die für die jeweiligen z.B. Menüs und Anweisungen: Englisch, Deutsch, Betrachtungsbedingungen (z.B. Raumhelligkeit) und die Art Französisch, Italienisch, Spanisch, Niederländisch, des Fernsehprogramms bzw.
All manuals and user guides at all-guides.com Grundeinstellungen Grundlegende Bildeinstellungen Erweiterte Bildeinstellungen Stellen Sie das Bild wunschgemäß für die gewählte AV- Das Plasma Display-System stellt Ihnen verschiedene Wahloption (außer DYNAMISCH) ein. fortschrittliche Funktionen zur Optimierung der Bildqualität zur Verfügung. Einzelheiten zu diesen Funktionen entnehmen Drücken Sie HOME MENU.
All manuals and user guides at all-guides.com Grundeinstellungen Wählen Sie den gewünschten Parameter ( / , dann Verwendung von Farbtemperatur ENTER). Drücken Sie HOME MENU. Wählen Sie „Bild“ ( / , dann ENTER). Sorgt für Bilder mit klareren Farbkonturen. CTI steht für „Colour Transient Wählen Sie „Profi-Einstellungen“...
All manuals and user guides at all-guides.com Grundeinstellungen Beseitigen von Bildrauschen Drücken Sie HOME MENU. Führt Kompensation so durch, dass optimale Bildkontrasteigenschaften erhalten werden. Wählen Sie „Bild“ ( / , dann ENTER). Wählen Sie „Profi-Einstellungen“ ( / , dann ENTER). Wählbare Punkte Aus Deaktiviert ACL.
All manuals and user guides at all-guides.com Grundeinstellungen Gegenstand Beschreibung Toneinstellungen Deaktiviert FOCUS. Mit den folgenden Einstellungen können Sie die Klangqualität (werksvorgabe) Ihren Wünschen anpassen. Stellen Sie den Ton wunschgemäß für die gewählte AV- Aktiviert FOCUS. Wahloption ein. Siehe Seite 27. Drücken Sie HOME MENU, um das Menü...
All manuals and user guides at all-guides.com Grundeinstellungen Keine Bedienung -aus- Energiesparmodi Schaltet das System automatisch auf den Mit den Energiesparmodi können Sie auf praktische Weise Bereitschaftsmodus, wenn drei Stunden lang keine Bedienung vorgenommen wird. Strom sparen. Drücken Sie HOME MENU. Energiesparmodus „Energiesparmodi“...
All manuals and user guides at all-guides.com Wiedergabe von DTV-Programmen Wiedergabe von DTV-Programmen Betrachten eines Kanalbanners DTV-Programme betrachten Ein Kanalbanner enthält Programmnamen, Programm-Start-/ Digital-TV (DTV) ersetzt nicht nur die herkömmlichen analogen Endzeiten und sonstige Kanalinformationen. Fernsehprogramme, sondern bietet darüber hinaus ein breiteres Programmangebot, eine bessere Bildqualität und Drücken Sie TV/DTV, um den DTV-Modus zu wählen.
All manuals and user guides at all-guides.com Wiedergabe von DTV-Programmen „Programm ersetzen“ wählen ( / , dann ENTER). Neukonfigurierung der • Das System löscht zuerst alle Kanalinformationen und DTV-Kanaleinstellungen startet dann eine Kanalsuche. In diesem Abschnitt wird beschrieben, wie Sie die DTV- Kanaleinstellungen nach Einrichtung der DTV-Kanäle mit Programm ersetzen Autoinstallation (Seite 24) neu konfigurieren können.
All manuals and user guides at all-guides.com Wiedergabe von DTV-Programmen „Ein“ oder “Aus“ wählen ( / ). Neues Programm hinzufügen Informationen suchen Programme gefunden Installation Aktuelle Programme ************ Spannungsversorgung Gefundene Programme ************ Land Deutschland Fortschritt ****** Neues Programm hinzufügen ************ Programm ersetzen Signalprüfung •...
All manuals and user guides at all-guides.com Wiedergabe von DTV-Programmen Aktivieren der Favoritenfunktion Individuelle Gestaltung kanalbezogener Vergessen Sie nach Speicherung von Kanälen als Favoriten Einstellungen nicht, diese Funktion zu aktivieren. In diesem Abschnitt wird beschrieben, wie verschiedene kanalbezogene Einstellungen individuell gestaltet werden Wiederholen Sie die Schritte 1 bis 4 von „Einstellen von können.
All manuals and user guides at all-guides.com Wiedergabe von DTV-Programmen ZUR BEACHTUNG Einstellen der Kindersicherung Mithilfe dieser Funktion können Sie verhindern, dass sich • Zum Ändern einer Seite im Sortiermenü unter Schritt 4 Kinder Fernsehprogramme ansehen können, für die ein wählen Sie bitte auf dem Bildschirm über Mindestalter vorgegeben ist.
All manuals and user guides at all-guides.com Wiedergabe von DTV-Programmen ZUR BEACHTUNG Wählen der Sprache für Ton, Untertitel • Als Normaleinstellung wird „Ein“ empfohlen. und Videotext • Damit Auto-Update startet, muss ein Spielraum von Die Spracheinstellungen für Ton, Untertitel und Videotext mindestens 1 Stunde bis zum Start der nächsten können manuell konfiguriert werden.
Kanälen geeignet ist. MHEG-Anwendungen verwenden (nur GB) ZUR BEACHTUNG Einige Stationen strahlen Programme mit MHEG-codierten • CA-Module und Smart-Cards sind bei PIONEER nicht Multimedia-Elementen (MHEG = Multimedia and Hypermedia inbegriffen und auch nicht als Sonderzubehör erhältlich. Expert Group) für interaktives DTV aus.
All manuals and user guides at all-guides.com Elektronische Programmführung (EPG) verwenden (nur DTV) Elektronische Programmführung (EPG) verwenden (nur DTV) Programminformation EPG-Anzeigeformat Die elektronische Programmführung (EPG) zeigt die Tabelle der geplanten TV-Programme und Detailinformationen über einzelne Programme an. Sie ermöglicht darüber hinaus 00:00 - 12:00 **************...
All manuals and user guides at all-guides.com Elektronische Programmführung (EPG) verwenden (nur DTV) Zum Einsehen weiterer Informationen (momentan nicht EPG verwenden angezeigt) bitte p drücken. Nach dem folgenden Vorgehen können Sie den Sendeplan von • Die Detail-Informationen erscheinen im digitalen TV-Programmen einsehen, die gewünschten Sendeplanfenster.
All manuals and user guides at all-guides.com Elektronische Programmführung (EPG) verwenden (nur DTV) Programm Timer Mi.24.Nov 12:34 TV-Programme über EPG Datum Zeit Programm Info vorprogrammieren Mo.05.Jan 12:00-13:00 001 ************ EPG ermöglicht einfaches Vorprogrammieren von digitalen TV- Täglich 14:00-15:00 007 *************** Programmen für spätere Betrachtung (automatische Wöchentlich So 14:00-15:00...
All manuals and user guides at all-guides.com Elektronische Programmführung (EPG) verwenden (nur DTV) ZUR BEACHTUNG Timer manuell programmieren Über das Menü können Sie digitale Fernsehprogramme auch • Die vorprogrammierte Aufnahme/Betrachtung startet sofort, durch Eingeben von Sendedatum und Uhrzeit wenn das Vorprogrammieren weniger als drei Minuten vor vorprogrammieren.
All manuals and user guides at all-guides.com Elektronische Programmführung (EPG) verwenden (nur DTV) • Die Einstellungenliste erscheint. Vorprogrammierung von TV-Programmen ändern/löschen Programm Timer Mi.24.Nov 12:34 Datum Zeit Programm Info Über EPG Mo.05.Jan 12:00-13:00 001 ************ Täglich 14:00-15:00 007 *************** Zum Ändern oder Löschen vorprogrammierter TV-Programme über die elektronische Programmführung (EPG) bitte nach Wöchentlich So 14:00-15:00...
All manuals and user guides at all-guides.com Elektronische Programmführung (EPG) verwenden (nur DTV) EPG-Suche Andere praktische EPG-Funktionen Drücken Sie GELB bei angezeigtem EPG-Bildschirm Nachstehend finden Sie eine Reihe praktischer Funktionen zum effektiveren und schnelleren Navigieren im EPG- (Programmliste, Detail-Information und Suchergebnisse). Bildschirm.
All manuals and user guides at all-guides.com Praktische Einstellmöglichkeiten Praktische Einstellmöglichkeiten Bevor Sie das Menü abrufen, drücken Sie INPUT 1, INPUT 2 Umschalten der vertikalen oder INPUT 3 an der Fernbedienung oder INPUT am Plasma Display, um eine Eingangsprogrammquelle zu wählen. Ansteuerungsfrequenz Drücken Sie HOME MENU.
All manuals and user guides at all-guides.com Praktische Einstellmöglichkeiten Manuelles Wählen einer Automatisches Wählen einer Bildschirmgröße Bildschirmgröße Drücken Sie f, um zwischen den Bildschirmgrößenoptionen Das Plasma Display wählt automatisch eine geeignete Bildschirmgröße, wenn in den empfangenen Videosignalen für den Typ der momentan empfangenen Videosignale WSS-Informationen enthalten sind, die das Seitenverhältnis umzuschalten.
All manuals and user guides at all-guides.com Praktische Einstellmöglichkeiten Ändern der Helligkeit an beiden Timer Bildschirmseiten (Seitenmaske) Bei Ablauf der vorgewählten Zeit schaltet der Timer das System automatisch auf den Bereitschaftsmodus. Bei Wahl des Bildschirmformats 4:3, VOLL 14:9 oder KINO 14:9 Drücken Sie HOME MENU.
Wir empfehlen, dass Sie Ihr Passwort eintragen, sodass es stets in Erinnerung bleibt. Wenn das Passwort nicht mehr verfügbar ist PDP-436SXE Wenn beim obigen Verfahren die Meldung „Ihr Passwort eingeben“ erscheint, drücken Sie die Taste ENTER an der Passwort-Nr.:...
All manuals and user guides at all-guides.com Einsatz externer Geräte Einsatz externer Geräte Das Plasma Display-System bietet Eignung für den Anschluss Wiedergabe von einem Videorecorder einer breiten Palette an externen Geräten wie Decoder, Videorecorder, DVD-Spieler, Computer, Spielekonsolen und Camcorder. Anschließen eines Videorecorders Zum Betrachten des Bilds einer externen Signalquelle wählen Zum Anschließen eines Videorecorders oder anderen Audio/ Sie mit den INPUT-Tasten an der Fernbedienung (Seite 13)
All manuals and user guides at all-guides.com Einsatz externer Geräte Gegenstand Beschreibung Verwendung des HDMI-Eingangs Deaktiviert Deaktiviert den HDMI-Anschluss. INPUT 3 umfasst HDMI-Kontakte, denen digitale Audio- und (Werksvorgabe) Videosignale zugeführt werden können. Zur Verwendung aktivieren Sie den HDMI-Anschluss und geben die Typen der Aktiviert Aktiviert den HDMI-Anschluss.
All manuals and user guides at all-guides.com Einsatz externer Geräte (Rückseite) Gebrauch von i/o Link.A Das Plasma Display-System ist mit drei charakteristischen i/o Link.A-Funktionen zur Verknüpfung des Plasma Displays mit anderen Audio/Video-Signalquellen ausgestattet. Direkter Wiedergabestart COMPONENT INPUT 3 Wenn das Plasma Display-System auf Bereitschaft geschaltet VIDEO HDMI AC I...
All manuals and user guides at all-guides.com Einsatz externer Geräte Wiedergabe von Spielekonsole oder Wiedergabe über angeschlossene Camcorder Audio-Geräte Anschließen einer Spielekonsole oder eines Anschließen von Audio-Geräten Camcorders Durch den Anschluss von Audio-Geräten wie eines AV- Receivers können Sie die Klangwiedergabe in neue Zum Anschluss einer Spielekonsole, eines Camcorders oder Dimensionen führen.
Recorder (DVR) angeschlossen haben, können Sie dank dieser Bildanzeige ausgegeben werden. Funktion auch problemlos zeitverschobene Wiedergabe genießen Drücken Sie HOME MENU. Die folgende Abbildung geht davon aus, dass ein Pioneer DVR- dann ENTER). 920H/DVR-930H am Plasma Display angeschlossen ist, sodass Wählen Sie „Grundeinstellungen“ ( / zeitverschobene Wiedergabe mit dem Recorder möglich ist.
All manuals and user guides at all-guides.com Videotext-Funktionen Videotext-Funktionen Was ist Videotext? Grundlegender Videotext-Betrieb Videotext bezeichnet von den Sendeanstalten zur Information und Unterhaltung ausgestrahlte Textdaten, die mit Ein- und Ausschalten von Videotext entsprechend ausgestatteten Fernsehgeräten empfangbar sind. Das Plasma Display-System empfängt Videotext von Wählen Sie einen Fernsehkanal oder eine externe Fernseh-Sendern und decodiert die Daten für die Betrachtung Eingangsquelle mit einem Videotext-Programm.
All manuals and user guides at all-guides.com Videotext-Funktionen Anzeigen von Unterseiten Anzeigen von Untertitelseiten Sie können mehrere Unterseiten wie empfangen anzeigen. Sie können mehrere Untertitel wie empfangen anzeigen. [ drücken, um den Untertitel anzuzeigen. Unterseiten-Bildschirm • Die Untertitel werden mit den vom Sender empfangenen Daten aktualisiert.
All manuals and user guides at all-guides.com Anhang Anhang Fehlerdiagnose Problem Lösungsansätze • Kein Strom. • Ist das Netzkabel abgetrennt? (Siehe Seite 15.) • System lässt sich nicht einschalten. • Ist der Hauptnetzschalter eingeschaltet? (Siehe Seite 18.) • Prüfen Sie, ob Sie Tasten 0 – 9 an der Fernbedienung betätigt haben. (Siehe Seite 18.) •...
All manuals and user guides at all-guides.com Anhang SCART-Anschlussbelegung Verschiedene Audio- und Video-Geräte können über die SCART-Anschlüsse mit dem System verbunden werden. 1 3 5 7 9 111315171921 2 4 6 8 101214161820 SCART (INPUT 1) 1. Ausgang Audio, rechts 8.
All manuals and user guides at all-guides.com Anhang Technische Daten Gegenstand 43”-Plasma Display, Modell: PDP-436SXE 1024 × 768 Pixel Anzahl Pixel 13 W + 13 W (1 kHz, 10 %, 8 Ω) Audio-Verstärker Lautsprecher Bassreflextyp (Zweiwege-System) Surround System SRS/FOCUS/TruBass Stromversorgung 220–240 V Wechselstrom, 50/60 Hz, 291 W (Bereitschaft 0,8 W)
Seite 176
PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300 PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270 Printed in UK / Imprimé au Royaume-uni<ARE1407-A>...