Setting The Gray Level For The Side Mask; Setting The Screen Size For S1/S2 Video Input; Turning On/Off The Information Display; Setting The Position Of The Menu - Pioneer PDP-615EX Bedienungsanleitung

Setting the gray level for the SIDE MASK

Use this procedure to set the gray level for the parts on the
screen on which nothing is displayed when the screen is
set to the 4:3 size and D BY D size.
Example: Setting "SIDE MASK" to "5"
On "SIDE MASK" of "SET UP" menu, select "5".
SET UP
LANGUAGE
BNC INPUT
D-SUB INPUT
HD SELECT
RGB SELECT
HDMI SET UP
COLOR SYSTEM
BACK GROUND
SIDE MASK
S1/S2
DISPLAY OSD
OSD ADJUST
ALL RESET
SEL. ADJ.
Information
SIDE MASK settings
This adjusts the brightness of the black (the gray level)
for the sides of the screen.
The standard is 0 (black). The level can be adjusted
from 0 to 15. The factory setting is 3 (dark gray).

Setting the screen size for S1/S2 video input

If the S-video signal contains screen size information, the
image will be automatically adjusted to fit the screen when
this S1/S2 is set to AUTO.
This feature is available only when an S-video signal is
input via the VIDEO3 terminal.
Example: Setting "S1/S2" to "AUTO"
On "S1/S2" of "SET UP" menu, select "AUTO".
SET UP
LANGUAGE
BNC INPUT
D-SUB INPUT
HD SELECT
RGB SELECT
HDMI SET UP
COLOR SYSTEM
BACK GROUND
SIDE MASK
S1/S2
DISPLAY OSD
OSD ADJUST
ALL RESET
SEL. ADJ.
Information
S1/S2 settings
AUTO: Adjusts the screen size automatically according
to the S1/S2 video signal.
OFF: Turns the S1/S2 function off.

Turning on/off the information display

When this is set to OFF, the information will not be
displayed even if you press the DISPLAY button.
Example: Turning the DISPLAY OSD off
On "DISPLAY OSD" of "SET UP" menu, select "OFF".
SET UP
LANGUAGE
BNC INPUT
D-SUB INPUT
HD SELECT
RGB SELECT
HDMI SET UP
COLOR SYSTEM
BACK GROUND
SIDE MASK
S1/S2
DISPLAY OSD
OSD ADJUST
ALL RESET
SEL. ADJ.
: ENGLISH
: COMPONENT
: RGB
: 1080I
: AUTO
: COLOR1
: AUTO
: GRAY
: 5
: OFF
: ON
: TOP LEFT
: OFF
EXIT RETURN
: ENGLISH
: COMPONENT
: RGB
: 1080I
: AUTO
: COLOR1
: AUTO
: GRAY
: 3
: AUTO
: ON
: TOP LEFT
: OFF
EXIT RETURN
: ENGLISH
: COMPONENT
: RGB
: 1080I
: AUTO
: COLOR1
: AUTO
: GRAY
: 3
: OFF
: OFF
: TOP LEFT
: OFF
EXIT RETURN
Information
DISPLAY OSD settings
ON: The informations on screen size, volume control,
etc. will be shown.
OFF: The informations on screen size, volume control,
etc. will not be shown.

Setting the position of the menu

Adjusts the position of the menu when it appears on the
screen.
Example: Set the position to "TOP CENTER"
On "OSD ADJ." of "SET UP" menu, select "TOP CENTER".
SET UP
LANGUAGE
BNC INPUT
D-SUB INPUT
HD SELECT
RGB SELECT
HDMI SET UP
COLOR SYSTEM
BACK GROUND
SIDE MASK
S1/S2
DISPLAY OSD
OSD ADJUST
ALL RESET
SEL. ADJ.
Information
OSD ADJUST settings
TOP TOP
LEFT CENTER
BTM BTM
LEFT CENTER

Resetting to the default values

Use these operations to restore all the settings (PICTURE,
SOUND, SCREEN, SET UP, etc) to the factory default
values.
Refer to page 13 for items to be reset.
On "ALL RESET" of "SET UP" menu, select "ON", then
press the MENU/SET button.
SET UP
LANGUAGE : ENGLISH
BNC INPUT : COMPONENT
D-SUB INPUT : RGB
HD SELECT : 1080I
RGB SELECT : AUTO
HDMI SET UP : COLOR1
COLOR SYSTEM : AUTO
BACK GROUND : GRAY
SIDE MASK : 3
S1/S2 : OFF
DISPLAY OSD : ON
OSD ADJUST : TOP LEFT
ALL RESET : ON
SEL. ADJ. EXIT RETURN
When the "SETTING NOW" screen disappears, then all the
settings are restored to the default values.
: ENGLISH
: COMPONENT
: RGB
: 1080I
: AUTO
: COLOR1
: AUTO
: GRAY
: 3
: OFF
: ON
: TOP CENTER
: OFF
EXIT RETURN
TOP
RIGHT
BTM
RIGHT
ALL RESET
SETTING NOW
21
En