JGC -URCD-20 Bedienungsanleitung Seite 31

• If the device is switched on by the wake up function, the particular LED indicator AL.1 or AL.2 will blink in
the display. To switch off the alarm, press on the relevant ALARM1 or ALARM2 button or press on the ON/
OFF button (17).
• Delete the wake up time by pressing once on the ALARM1 or ALARM2 button. The LED indicator AL.1 or
AL.2 will go out.
Repeat alarm (SNOOZE)
• If the device is switched on by the wake up function, it can be switched off temporarily by means of the
SNOOZE button (2). The LED indicator SNOOZE (E) will come on.
• The device will be switched on again after approx. 5 minutes.
Programmed switch-off (SLEEP)
• To fall asleep with music, a time of 90, 60, 30 or 15 minutes can be set. After the time has elapsed, the
device will automatically switch off.
• Press the SLEEP button (4) several times to determine the switch-off time. The LED indicator SLEEP (H) will
come on in the display.
• To deactivate the sleep function, press the SLEEP button as often as it takes until the LED indicator SLEEP
goes out.
JGC-URCD-20-IM-DE-EN-V1.indb 31
Downloaded from www.Manualslib.com
The alarm function is active, if the LED indicators AL.1 or AL.2 come on. The device will switch on
every day at the saved time.
The wake up settings will be deleted if you pull the power plug (25) and if there are no batteries
inside the battery compartment (24) on the back of the device. Set the wake up time again.
You can switch off the device at any time with the ON/OFF button (17) before the programmed time
has elapsed.
If you use the sleep function in CD operating mode, the CD may have finished playing before the
device switches off automatically. For example, if you set the device to switch off after 90 minutes
but the playing time of the CD is only 45 minutes, then the CD will have finished playing, before the
shut-off time is reached.
manuals search engine
CLOCK FUNCTIONS
31
29/01/2010 5:26 PM