English; Technical Specifications - Raikko USB AccUPACK 8000TAB Bedienungsanleitung

English

Introduction
Dear Customer, Thank you for choosing a
To ensure proper use of the product purchased, please read the
instruction manual and all safety warnings carefully.
The USB AccuPack 8000TAB is a mobile charger
with built-in lithium polymer battery. It can be used as an energy
source for all end devices that are charged or powered via a
USB port. The USB port is only used for the transmission of
electric power. There is no data transfer. The device also has a
12 V connection for charging Tablet PCs and other devices with
a 12 V power supply.
Overview
1. Charging socket
2. USB-Output
12
Downloaded from www.Manualslib.com
USB AccUPAcK 8000TAB
product.
3. Function key 4. 12 V DC output
manuals search engine
English

Technical specifications

Input voltage:
Maximum input current:
Capacity:
Output voltage/current USB:
Output voltage/current 12 V:
Product size:
Weight (net):
General information
Operation (function key):
• Hold down the function key for 2– 3 seconds to switch on the
battery pack. The LEDs of the display will light up briefly from
left to right.
• The charging process will then start automatically. The LEDs of the
display will light up from left to right while charging. This display is
repeated continuously during the charging process. The number of
lit LEDs indicates the remaining capacity of the AccuPack.
• Press the function key to interrupt the charging process.
• Press the function key again to restart the charging process.
• Hold down the funcion key for 2– 3 seconds to switch the
AccuPack off again. The LEDs of the display will light up from
right to left and then go off. This will interrupt the charging
process.
USB AccUPAcK 8000TAB
12.8 V
1200 mA
8000 mAh/3.7 V
5.1 V/MAx. 2000 mA
12 V/MAx. 2000 mA
145 x 56 x 19 mm
210 g
13