Technical Data; Declaration Of Conformity; Safety Instructions - WOLFF 76859 Original Bedienungsanleitung

1.0 Technical data

Power supply . . . . . . . . . . . . . . . . . . . . . .
Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum speed . . . . . . . . . . . . . . . . . . .
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . .
Sound energy level . . . . . . . . . . . . . . . . . . . . . . . . .
Hand/arm-vibration . . . . . . . . . . . . . . . . . . . . . . . . . . .
Max. grooving depth . . . . . . . . . . . . . . . . . . . . . . . . . .
Grooving blade . . . . . . . . . . . . . . . . . . . . . . . .
Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Number of teeth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tooth formation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.0

Declaration of Conformity

We declare under our sole responsibility that this product is in con-
formity with the following standards of standardization documents:
DIN EN 1037, EN ISO 12100, DIN EN 60204-1, DIN EN 60745-
1, DIN EN 60745-2-22, DIN EN 55014-1, DIN EN 55014-2
according to the provisions of the: 2006/42/EC, 2004/108/EC,
2006/95/EC.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the
gathering of the technical documentation.
03.03.2015, i.V.
Uzin Utz Tools GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1

3.0 Safety instructions

Disconnect the power supply before any maintenance is carried
out. Use only the recommended blade and ensure it is sharp
before starting.
Maintenance should be undertaken only by qualified personnel.
Use only genuine WOLFF spare parts.
3.1 Introduction
This operating manual should be used to get the most benefit
from your REPAIR-GROOVING MACHINE. Following these
instructions will both extend the life of your machine and reduce
repair costs. Please ensure any user of the machine is fully fami-
liar with the instructions for use before allowing work to start.
3.2 Danger while working with the machine
The REPAIR-GROOVING MACHINE is designed to the highest
technical standards. Incorrect use can be dangerous!
Disturbances that could impair safety, have to be eliminated at
once.
REPARATURFRÄSE 230 V , D, F, A
01/2015
.230 V AC (110 V AC)
.40 - 60 Hz
.1500 W
.6.000 - 10.000 r.p.m.
.6,2 kg
.91 dB(A)
.107 dB(A)
.2,5 m/s²
.0 - 5 mm
.tungsten tipped
.130 mm
.6,0 mm
.12
.straight
Comes with:
REPAIR-GROOVING MACHINE
Goggles
Ear protection
Tool kit
Dust bag
Carrying case
Operating manual
When using the grooving machine always wear goggles
and ear protectors supplied. Otherwise you are in danger
of injuring your eyes or your ears.This machine works
at a high speed and these precautions are for your safety!
Use this machine only
as instructed in this operating manual
with the machine in perfect working order.
#76859R
9