Technical Specifications - HQ Power VDSMB14 Bedienungshandleitung

100V consideration - only applicable to 100V tap speaker
The 100V transformer offers you the ability to daisy-chain multiple numbers of
speakers in series. In doing so, you would simply connect 1 pair of outputs to each
speaker and daisy-chain to subsequent speakers. If you do not intend to daisy-chain
the speakers, set the default setting to 8Ω.

3. Technical Specifications

Woofer
Tweeter
Power
Power Line 100/70V
Frequency Response
Sensitivity
Impedance
Dimensions
Weight
Refer to the Velleman® Service and Quality Warranty on the last pages of this
manual.
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulted from (incorrect) use of
this device. For more info concerning this product, please visit our website
www.hqpower.eu. The information in this manual is subject to change without
prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman
Components nv. All worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
VDSMB14/15
Downloaded from www.Manualslib.com
100W max./30W RMS
135 x 205 x 136mm
manuals search engine
VDSMB14
4" polypropylene
½" Mylar
2/4/8/16W
80Hz ~ 20,000Hz
88dB @ 1W/1m
8Ω
1.4kg
3
VDSMB15
5 ¼" polypropylene
®
dome
120W max./35W RMS
50Hz ~ 20,000Hz
89dB @ 1W/1m
16Ω
163 x 239 x 160mm
1.9kg
HQPOWER
®