Cleaning And Maintenance; Technical Specifications - HQ Power VDSSM1 Bedienungsanleitung

7. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Contact your dealer for spare parts if necessary.

8. Technical Specifications

Satellite
Frequency Response
Hardware
Impedance
Continuous Power Handling
Peak Power
Sensitivity
Dimensions
Total Weight
Max. Ambient Temperature
Subwoofer
Input Impedance
Frequency Response
THD
Hardware
Impedance
Continuous Power Handling
Peak Power
Sensitivity
Power Output
Power Supply
Dimensions
Weight
Max. Ambient Temperature
The information in this manual is subject to change without prior notice.
VDSSM1
55Hz ~ 20KHz
R-10 10'', 1.5''
8 ohms
200W RMS
250W / 5min
99dB (1W / 1m)
505 x 320 x 300mm
14kg
45°C
10 kohms
25Hz ~ 350Hz
<0.05%
R-15 15''
8 ohms
350W RMS
400W / 5min
98dB (1W / 1m)
350W
240VAC / 50Hz
655 x 500 x 620mm
70kg
45°C
4 VELLEMAN