Wiring Possibilities; Cleaning And Maintenance; Technical Specifications - HQ Power VDSMB17 Bedienungsanleitung

5.

Wiring Possibilities

Refer to the illustrations on page 2 of this manual.
6. Treble Attenuation Switch
The speaker features a treble attenuation switch for
reduction of high-frequency output in challenging installation
applications such as overly reflective rooms, allowing for a
better frequency balance.
7.

Cleaning and Maintenance

Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals, cleaning
solvents or strong detergents.
8.

Technical Specifications

frequency response
RMS power
impedance
sensitivity (1w/1m)
woofer
tweeter
tweeter equalizer
cut-out dimensions
overall dimensions
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 02 – 28/09/2016
VDSMB17/VDSMB17S
The grill to cover the speaker can simply be
coated with regular paint. If the grill comes with
an additional coating, this must be removed
before painting.
VDSMB17
60 Hz-20 kHz
8 Ohms
6.5" (165 mm) Kevlar woven cone with rubber suspension,
1" (25 mm) ASV coil, 18 oz. magnet
1.2" (30 mm) titanium dome
5
VDSMB17S
55 Hz-20 kHz
60 W
8 + 8 Ohms
90 dB
2 x 1.2" (30 mm) titanium dome
+3 dB/-3 dB
210 mm
227 x 87 mm
©Velleman nv