Configuring A Locomotive - Trix Systems 66950 Bedienungsanleitung

This menu is used to make custom adjustments to the locomotive or its decoder. The loco-
motive address, the locomotive name, and all CV parameters can be edited. Please see the
instructions for your locomotive or decoder to determine how much your locomotive can
be edited in this menu. Only the locomotive to be edited may be standing on the track.
In this menu the locomotive selected remains called up and can be controlled from the
control knob, thus allowing you to check the altered programming immediately and correct
it if necessary.
Select: Edit
Locomotive
Editing a Locomotive
Select:
Name
Select:
Address
Configuring a Locomotive
then additionally press
�����
Select: Scroll
Can only be used
with programmable
See page 9 for pro-
See page 9 for
procedure
decoders.
cedure.
13