TRIX Systems 66950 Bedienungsanleitung Seite 29

Select:
Enter manually
Select: Ex. MM2
programmable
Select Address
+
�����
or
Address selected
Cursor
back
controls editing of the locomotive later on. For example,
with programmable decoders changing the address must
also be sent to the locomotive to be stored in memory, but
not for locomotives with coding switches.
The letters or digits can be selec-
ted at this spot.
The following steps are the
same for all types of decoders.
The selection of the decoder
Address range:
MM2 with coding switches 1- 80
MM2 programmable 1 - 255
DCC 1 - 9999
Confirm selection
Forward
Select
letter
+
�����
Select: Scroll
9