Finding A Locomotive - Trix Systems 66950 Bedienungsanleitung

Finding a Locomotive

!
The locomotive to be found must be the only locomotive
standing on the track layout.
Look for a free
memory space by pressing
this button (several times if
necessary).
Select:
Find
6
A search is made for
the locomotive.
or
or
Locomotive has been found, taken into
the locomotive list, and is ready to run.
Locomotive has been found. The address
already exists and was not automatically
taken into the locomotive list. Take into
the list or reject as desired.
Locomotive was not found. Confirm and
search again. Check the locomotive if
necessary or program again, or if the
address is known, enter manually.