Operation; Switching Actuators; Blind Actuator; Resetting To Factory Status - eQ-3 HomeMatic HM-LC-Sw1-FM Installations- Und Bedienungsanleitung

8

Operation

After teaching, simple operating functions are avail-
able using the taught control elements.

8.1 Switching actuators

Depending on the control elements that have been
taught, the switch actuator can be controlled in two
button ON/OFF mode or in toggle mode.

8.2 Blind actuator

Depending on the control elements that have been
taught, the blind actuator can be controlled in two
button UP/DOWN mode or in toggle mode (UP/
STOP/DOWN/STOP).
In order to avoid unintended reset of factory
settings during operation of the device, please
deactivate the reset function via device button
in the WebUI of the CCU.
9

Resetting to factory status

In order to reset the actuator to factory status, switch
the device to teach mode with the (first) channel but-
ton (hold button pressed for at least 4 seconds).
45