eQ-3 HomeMatic HM-LC-Sw1-FM Installations- Und Bedienungsanleitung Seite 31

Use only mains power capable buttons and
wires for connecting to button inputs!
Switch actuator:
Follow all technical specifications, especially
the maximum permitted switching capacity of
the relay and type of consumer to be con-
nected, before connecting the consumer! All
load specifications refer to resistive loads!
Blind actuator:
The actuator is only suitable for 230V a.c. mo-
tors!
Never connect three-phase a.c. motors or d.c.
motors!
If motors are connected to the output in paral-
lel with the actuator, make sure to observe the
motor manufacturer's specifications.
The motors can be damaged otherwise. Use
only blinds or shutters with limit switch (me-
chanical or electronic)!
Check the limit switch for the connected mo-
tors for proper adjustment before starting the
blind actuator!
31