Spotify - Kenwood CR-ST100S Bedienungsanleitung

6.2.1 Saving podcasts on the direct selection buttons 1-5 on the radio:
On the radio, you can assign memory locations 1 - 5 using the number keys. To do this, select the
desired podcast and press a number key until "Preset stored" appears on the display. The memory
locations can be called up by pressing the button briefly.
6.2.2 Saving podcasts with the remote control:
Memory locations 1–10 can be assigned using the number buttons on the remote control. To do this,
select the desired podcast and press a number key on the remote control until "Preset stored" appe-
ars on the display. The memory locations can now be called up by pressing the remote control briefly.
6.2.3 Saving podcasts on memory locations 11 - 20:
Select the desired podcast and hold down the <FAVORITE> button on the radio or <FAV> on the
remote control. Now select a memory location from the list of station memories and confirm the
selection with the <NAVIGATE> button on the radio. The "Preset stored" appears on the display.
You can easily call up the memory locations by briefly pressing the <FAVORITE> button on the radio
or <FAV> on the remote control. Use the <UP/DOWN> buttons or the <NAVIGATE> knob to select
a podcast and press <OK> to confirm.
Note: The memory locations cannot be deleted, but can only be overwritten with other stations.

7. Spotify

Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to
learn how. The Spotify Software is subject to third party licenses found here:
www.spotify.com/connect/third-party-licenses.
For this you need a Spotify account (information at www.spotify.de)
Install the Spotify App on your Android/iOS device. You can download it from the Play Store or from
the Apple App Store. After installation, start the App and log in with your access data or register. The
radio and the Android/iOS device with the Spotify App must be in the same network.
7.1 Use
Please select the source "Spotify" in the main menu and start playing Spotify on your smartphone as
usual. The Spotfiy Connect logo and "Available devices" are displayed at the bottom of the phone.
Press "Available devices" to display a list of the devices available on the network. Now select
"KENWOOD CR-ST100S" and the playback will take place on the radio. A successful connection is
indicated by green script. After a successful first connection, you can also connect the smartphone to
the radio as follows: Select the source "Spotify" in the main menu and press <OK>. The "Press Play
..."now appears in the display. Press the <Play/Pause> button on the remote control to establish
the connection and start playing the current Playlist. You can also use the remote control to jump
between the tracks in the current list.
13