Scope Of Delivery; Technical Data; Maintenance - REV Ritter ZZ-812-SMD Bedienungsanleitung

GB

SCOPE OF DELIVERY

Check the delivery for completeness and perfect condition.
In the case of missing parts or damage:
• do not mount the unit!
• do not put the unit into operation!
• make a complaint to the supplier.
The deliver consists of:
• Product
• Instructions
• Power supply unit (cable length 1.8m)
• Car adapter (cable length 1.45m)

TECHNICAL DATA

Worklight
• Output: 7,2W LED
• Illuminant: SMD LED´s
• Luminous flux: 900lm
• Colour temperature: 6500K
• Ra/CRI: ≥ 70
• Energy Efficiency class: A+
• LED service life: 30000h
• Beam angle: 100°
• IP protection class: IP20
• Protection class: III (S6)
• Ambient temperature: 0°C – 25°C
• Battery: Li-Ion (18650): 7,4V
• Battery life: 2h
• Charging time: 4h
• Light output: 125lm/W
• Dimming mode: 50% / 100%
• Adjustable in 2 steps (see function)
INSTALLATION
• Please refer to the drawings for the installation steps.
CLEANING
• Allow the luminaire to cool down sufficiently!
• Before cleaning, unplug the product from the power point or disconnect it from the mains supply!
• Clean with a dry or slightly moist, clean, lint-free cloth and a mild detergent if required. Do not use cleaners that
contain abrasives or solvents.

MAINTENANCE

• Replace any damaged protective panels immediately (S8).
• Remove all dirt from the housing or protective panel immediately, as this can lead to overheating.
• The light source of this luminaire is not replaceable; if the light source has reached the end of its service life, the
entire luminaire must be replaced.
10
Power supply unit
• Manufacturer: Yuyao Simen Town Wanji Electrics
Factory Simen Industrial Zone, Yuyao City, Zhejiang,
P.R.China
Commercial register number: 91330281768523343N
• Model code: WJG-Y091200500W
• Input voltage: 230V
• Input alternating current frequency: 50Hz
• Output voltage: 12.0V DC
• output current: 0,5A
• Power output (Po): 6.0W
• Average operational efficiency: 80.75%
1800mAh; 13,3Wh
• Efficiency at low load (10%): 68.1%
• Power consumption at no load: 0.06W
• Protection class: II (S7)
Car adapter
• input voltage: 12.0V
• Input alternating current frequency: 50Hz
• Output voltage: 12.0V DC
• output current: 0,4A
• Output power: max. 4.8W