Jet-Line group AURELIO Aufbau-/Bedienungsanleitung Seite 14

STEP 4
STEP 5
STEP 6
Use Screws (A) and Allen Key 5x5 (C)
to connect the Support Plates (6) with
the Columns (2) and (3)
Install the Control Box (7)
and the Hand Switch (9)
Use the Screws (F) and an electric drill
to mount the tabletop onto the frame
Make sure that the outer edge of the
tabletop is no more than 20 cm (max.)
from the Support Plate (6)
Use Screws (E)
and Allen Key 2,5x2,5 (D)
to install the Baffles (8)
14